Proceedings
Authors
| Filter results17 paper(s) found. |
|---|
1. Near Real-time Meter-resolution Airborne Imagery For Precision Agriculture: AerocamPrecision agriculture often relies on high resolution imagery to delineate the variability within a field. Airborne Environmental Research Observational Camera (AEROCam) was designed to meet the needs of agriculture producers, ranchers, and researchers, who require meter-solution imagery in a near real-time environment for rapid decision support. AEROCam was developed and operated through a unique collaboration... X. Zhang, C.R. Streeter, H. Kim, D.R. Olsen |
2. New Power-leds Based Illumination System For Fertilizer Granule Motion EstimationEnvironmental problems have become more and more pressing in the past twenty years particularly with the fertilization operation, one main contributor to environmental imbalance. The understanding of the global centrifugal spreading process, most commonly used in Europe, can contribute to provide essential information about fertiliser granule deposition on the soil. This last one can be predicted using a ballistic flight model and several fertilizer characteristic’s determination... F. Cointault, B. Hijazi, J. Dubois, J. Vangeyte, M. Paindavoine |
3. Wheat Growth Stages Discrimination Using Generalized Fourier Descriptors In Pattern Recognition Context... F. Cointault, A. Marin, L. Journaux, J. Miteran, R. Martin |
4. 3D Acquisition System Applied to Agronomic ScenesTo enable a better decision making by the farmer in order to optimize the crop management, it is essential to provide a set of information on basic parameters of the crops. These information are numerous and the image processing is increasingly used for disease detection, weed detection or yield estimation. We will focus initially on assessing the yield of a wheat crop in automatic way. This yield is directly related to the number of ears per square meter for which the counting is currently... F. Cointault, P. Gouton, B. Billiot |
5. Landscape Influences on Soil Nitrogen Supply and Water Holding Capacity for Irrigated Corn... T. Shaver, M. Schmer, S. Irmak, S. Van donk, B. Wienhold, V. Jin, A. Bereuter, D. Francis, D. Rudnick, N. Ward, L. Hendrickson, R. Ferguson, V.I. Adamchuk |
6. Variability in Soil Water Content and Sensor-Based Irrigation Scheduling for Protected Ginseng ProductionGinseng is one of important medicinal plants, especially in Asian countries including Korea. Korean ginseng is mostly grown in sun-block facility on ridges, and irrigation would be critical for better production. Conventionally no irrigation or timer-controlled irrigation based on experience was practiced, and variability of... J. Cho, B. Cho, S. Chung |
7. Proximal Sensing Tools to Estimate Pasture Quality Parameters.To date systems for estimating pasture quality have relied on destructive sampling with measurement completed in a laboratory which was very time consuming and expensive. Results were often not received until after the pasture was grazed which defeated the point of the measurement, as farmers required the information to make decisions about grazing strategies to effectively... R. Pullanagari, I. Yule, M. Tuohy, M. Hedley, W. King, . Dynes |
8. Automated Segmentation and Classification of Land Use from Overhead ImageryReliable land cover or habitat maps are an important component of any long-term landscape planning initiatives relying on current and past land use. Particularly in regions where sustainable management of natural resources is a goal, high spatial resolution habitat maps over large areas will give guidance in land-use management. We propose a computational approach to identify habitats based on the automated analysis of overhead imagery. Ultimately, this approach could be used to assist experts,... C. Pradalier, A. Richard, V. Perez, R. Van couwenberghe, A. Benbihi, P. Durand |
9. Design and Analysis of ISO 11783 Task Controller's Functionality in Server - Client ECU for Agricultural VehiclesA modern agricultural vehicle's electronic control units (ECU) communicated based on the ISO 11783 standards. The connection of different machines, implements, different manufacturers into a single bus for the exchange of control commands and sensor data are a challenge for the precision agriculture. One of main functionality is the Task controller in the intelligent monitoring system. The task controller is to log data and assign set-point values for automated work (task) sequences... E. Tumenjargal, E. Batbayar, S. Munkhbayar, S. Tsogt-ochir, M. Oyumaa, K. Chung, W. Ham |
10. Precision Irrigation Management Through Conjunctive Use of Treated Wastewater and Groundwater in OmanAgriculture under arid environment is always become a challenge due to water scarcity and salinity problems. With average rainfall of 100 mm, agriculture in Oman is limited due to the arid climate and limited arable lands. More than 50 percent of the arable lands are located in the 300 km northern coastal belt of Al-Batinah region. In addition, country is facing severe problem of sea water intrusion into the groundwater aquifers due to undisciplined excessive groundwater (GW) abstraction... H. Jayasuriya, A. Al-busaidi, M. Ahmed |
11. Experiences in the Development of Commercial Web-Based Data Engines to Support UK Growers Within an Industry-Academic PartnershipThe lifecycle of Precision Agriculture data begins the moment that the measurement is taken, after which it may pass through each multiple data processes until finally arriving as an output employed back in the production system. This flow can be hindered by the fact that many farm datasets have different spatial resolutions. This makes the process to aggregate or analyse multiple Precision Agriculture layers arduous and time consuming. Precision Decisions Ltd located in Yorkshire,... J. Taylor, Y. Shahar, P. James, C. Blacker, S. Leese, R. Sanderson, R. Kavanagh |
12. Estimating Litchi Canopy Nitrogen Content Using Simulated Multispectral Remote Sensing DataThis study aims at evaluating the performance of seven highly spatial resolution remote sensing data in litchi canopy nitrogen content estimation. The litchi canopy reflectance were collected by ASD field spectrometer. Then the canopy spectral data were resampled based on the spectral response functions of each satellite sensors (Geo-eye, GF-WFV1, Rapid-eye, WV-2, Landsat 8, WV-3, and Sentinel-2). The spectral indices in literature were derived based on the simulated data. Meanwhile, the successive... D. Li, H. Jiang, S. Chen, C. Wang |
13. Economic Potential of RoboWeedMaps - Use of Deep Learning for Production of Weed Maps and Herbicide Application MapsIn Denmark, a new IPM ‘product chain’ has been constructed, which starts with systematic photographing of fields and ends up with field- or site-specific herbicide application. A special high-speed camera, mounted on an ATV took sufficiently good pictures of small weed plants, while driving up to 50 km/h. Pictures were uploaded to the RoboWeedMaps online platform, where appointed internal- and external persons with agro-botanical experience executed ‘virtual field inspection’... P. Rydahl, O. Boejer, N. Jensen, B. Hartmann, R. Jorgensen, M. Soerensen, P. Andersen, L. Paz, M.B. Nielsen |
14. Evaluating a Satellite Remote Sensing and Calibration Strip-based Precision Nitrogen Management Strategy for Corn in Minnesota and IndianaPrecision nitrogen (N) management (PNM) aims to match N supply with crop N demand in both space and time and has the potential to improve N use efficiency (NUE), increase farmer profitability, and reduce N losses and negative environmental impacts. However, current PNM adoption rate is still quite low. A remote sensing and calibration strip-based PNM strategy (RS-CS-PNM) has been developed by the Precision Agriculture Center at the University of Minnesota.... K. Mizuta, Y. Miao, A.C. Morales, L.N. Lacerda, D. Cammarano, R.L. Nielsen, R. Gunzenhauser, K. Kuehner, S. Wakahara, J.A. Coulter, D.J. Mulla, D. . Quinn, B. Mcartor |
15. X-ray Imaging in Breeding and Harvesting ProcessesThe application of X-ray technology has a long tradition in different medical and technical fields. Compared to other sensor systems, its advantages lie in the capability to reveal structures within objects non-destructively. The analysis of X-ray images with image processing methods is applied for quality control, the detection of foreign objects or damages and other anomalies (e.g. in organs or bones). Until recently, the application of X-ray was mainly constrained to stationary applications... M. Weule, E. Hufnagel, J. Claussen, A. Berghaus, S. Burkhart, P. Noack, S. Gerth |
16. Data-driven Agriculture and Sustainable Farming: Friends or Foes?Sustainability in our food and fiber agriculture systems is inherently knowledge intensive. It is more likely to be achieved by using all the knowledge, technology, and resources available, including data-driven agricultural technology and precision agriculture methods, than by relying entirely on human powers of observation, analysis, and memory following practical experience. Data collected by sensors and digested by artificial intelligence (AI) can help farmers learn about synergies... O. Rozenstein, Y. Cohen, V. Alchanatis , K. Behrendt, D.J. Bonfil, G. Eshel, A. Harari, W.E. Harris, I. Klapp, Y. Laor, R. Linker, T. Paz-kagan, S. Peets, M.S. Rutter, Y. Salzer, J. Lowenberg-deboer |
17. Participatory Irrigation Extension Programs to Increasing Adoption of Best Irrigation StrategiesFarmers in Alabama, Tennessee, and other US southeastern states lack experience in irrigation water management and adoption of the state-of-the-art technologies and practices to increase irrigation water use efficiency. Several federal and state-funded projects are being implemented to demonstrate and train farmers and consultants on irrigation scheduling strategies and variable rate irritation. Half a dozen on-farm demonstration sites are selected every year to evaluate, demonstrate, and train... L. Nunes, E. Francisco, R. Prasad, B.V. Ortiz, E. Abban-baidoo , M. Worosz, M. Robinette , C. O'connor, A. Gamble |