Proceedings
Authors
| Filter results6 paper(s) found. |
|---|
1. Measuring Error on Working Depth of Real-time Soil SensorThis paper described about the measuring error on working depth of the Real-time soil sensor (RTSS). It is necessary for accurately evaluating to observe the variation on the working depth, because the RTSS run in various real field conditions, such as soft or hard and even or uneven, and the RTSS has various using objective. In this paper, the RTSS run on asphalt with steps while the three-point hitch was free and position-controlled. In position-controlled, the measuring depth that is the... R. Kanda, M. Kodaira, S. Shibusawa |
2. Assessing Soybean Injury from Dicamba Using RGB and CIR Images Acquired on Small UAVsDicamba is an herbicide used for postemegence control of several broadleaf weeds in corn, grain sorghum, small grains, and non-cropland. Currently, dicamba-tolerant (DT) soybean and cotton are under development, which provide new options to combat weeds resistant to glyphosate, the most widely used herbicide. With the use of DT-trait cotton and soybean, off-target dicamba drift onto susceptible crops will become a concern. To relate soybean injury to different rates of dicamba applications,... Y. Huang, H. Brand, D. Pennington, K. Reddy, S.J. Thomson |
3. On-Farm Digital Solutions and Their Associated Value to North American FarmersDigital tools and data collection have become standard in a wide variety of present day agricultural operations. An array of digital tools, such as high resolution operational mapping, remote sensing, and farm management software offer solutions to many of the problems in modern agriculture. These technologies and services can, if implemented correctly, provide both immediate and long term agronomic value. A growing number of producers in Ohio and around North America question the proper method... R. Colley iii, J. Fulton, N. Douridas, K. Port |
4. Field Level Management and Data Verification of Variable Rate Fertilizer ApplicationIncreased cost efficiencies and ease of use make spinner-disc spreaders the primary method of applying fertilizers throughout much of the United States. Recently, advances in spreader systems have enabled multiple fertilizer products to be applied at variable application rates. This provides greater flexibility during site-specific management of in-field fertility. Physical and aerodynamic properties vary for fertilizer granules of different sources and densities, these properties in turn affect... R. Colley iii, J. Fulton, S. Virk, E. Hawkins |
5. Development of a Graphical User Interface for Spinner-Disc Spreader Calibration and Spread Uniformity AssessmentBroadcast fertilizer distribution through spinner-disc spreaders remain the most cost-effective, and least time consuming process to apply the needed soil amendments for the next crop. Spreaders currently available to producers enable them to apply a variety of granular products at varying rates, blends, and swath widths. In order to uniformly apply granular fertilizer or lime, the spreader should be calibrated by standard pan testing with any change in spreader settings, application rate, or... R. Colley iii, Y. Lin, J. Fulton, S. Shearer |
6. Overview and Value of Digital Technologies for North American Soybean ProducersIn the current state of digital agriculture, many digital technologies and services are offered to assist North American soybean producers. Opportunities for capturing and analyzing information related to soybean production methods are made available through the adoption of these technologies. However, often it is difficult for producers to know which digital tools and services are available to them or understand the value they can provide. The objective of this... J. Lee, J. Fulton, K. Port, R. Colley iii |