Proceedings
Authors
| Filter results8 paper(s) found. |
|---|
1. Revisited: A Case Study Approach For Teaching And Applying Precision AgricultureCurrent agricultural students understand and are excited about new technologies, but often do not understand how precision agriculture can be applied to farming operations. A case-study approach that requires students to develop precision agriculture management practices which includes selecting equipment and assessing the financial feasibility could help students understand and apply precision agriculture. This paper revisits a case-study approach to teaching precision agriculture and describes... J.D. Williams, S.D. Mcgary, M. Waits |
2. Post-Harvest Quality Evaluation System On Conveyor Belt For Mechanically Harvested CitrusRecently, a machine vision technology has shown its popularity for automating visual inspection. Many studies proved that the machine vision system can successfully estimate external qualities of fruit as good as manual inspection. However, introducing mechanical harvesters to citrus industry caused the following year’s yield loss due to the loss of immature young citrus. In this study, a machine vision system on a conveyor belt was developed to inspect mechanically... W. Lee, R. Ehsani, F. Roka, D. Choi, C. Yang |
3. Prototype Unmanned Aerial Sprayer for Plant Protection in Agricultural and Horticultural CropsAerial application of pesticides has the potential to reduce the amount of pesticides required as chemicals are applied where needed. A prototype Unmanned Aerial Sprayer with a payload of 20 kg; a spraying rate of 6 liters per minute; a spraying swathe of 3 meters, coverage rate of 2 to 4 meters per second and 10 minutes of flight time was built using state of the art technologies. The project is a joint development by University of Agricultural Sciences, Dharwad, KLE Technological University,... S. Reddy, D.P. Biradar, V.C. Patil, B.L. Desai, V.B. Nargund, P. Patil, V. Desai, V. Tulasigeri, S.M. Channangi, W. John |
4. Utilization of Spatially Precise Measurements to Autocalibrate the EPIC Agroecosystem ModelCorn nitrogen recommendations for individual fields must improve to minimize the negative influence that agriculture has on the environment and society. Two adaptive N management approaches for making in-season N fertilizer recommendations are remote sensing and crop systems modeling. Remote sensing has the advantage of characterizing the spatial variability at a high spatial resolution, and crop models are prognostic and can assess expected additions and losses that are not yet reflected by the... T. Nigon, D. Mulla, C. Yang |
5. A Case Study Comparing Machine Learning and Vegetation Indices for Assessing Corn Nitrogen Status in an Agricultural Field in MinnesotaCompact hyperspectral sensors compatible with UAV platforms are becoming more readily available. These sensors provide reflectance in narrow spectral bands while covering a wide range of the electromagnetic spectrum. However, because of the narrow spectral bands and wide spectral range, hyperspectral data analysis can benefit greatly from data mining and machine learning techniques to leverage its power. In this study, rainfed corn was grown during the 2017 growing season using four nitrogen treatments... A. Laacouri, T. Nigon, D. Mulla, C. Yang |
6. Improving the Use of Artificial Neural Networks for Site-Specific Nitrogen FertilizationFor the planning of site-specific nitrogen fertilization, adequate decision rules are needed. Prerequisite for site specific nitrogen fertilization is the site specific forecast of yield. For this the use of artificial neural networks (ANN) has proven particularly interesting. Therefore, ANN based small-scale yield forecasts are realized in order to deviate the economic optimum of fertilization. The basis of yield forecasts with ANN are different site-specific input variables that have presumable... J.S. Hauser, P. Wagner |
7. Prototype Unmanned Aerial Sprayer for Plant Protection in Agricultural and Horticultural CropsAerial application of pesticides has the potential to reduce the amount of pesticides required as chemicals are applied where needed. A prototype Unmanned Aerial Sprayer with a payload of 20 kg; a spraying rate of 6 liters per minute; a spraying swathe of 3 meters, coverage rate of 2 to 4 meters per second and 10 minutes of flight time was built using state of the art technologies. The project is a joint development by University of Agricultural Sciences, Dharwad, KLE Technological University,... S. G, D.P. Biradar, B.L. Desai, V.C. Patil, P. Patil, V.B. Nargund, V. Desai, W. John, S.M. Channangi, V. Tulasigeri |
8. Optimizing Soybean Management with UAV RGB and Multispectral Imagery: a Neural Network Method and Image ProcessingPrecision agriculture (PA) has emerged as a fundamental approach in contemporary agricultural management, aimed at maximizing efficiency in the use of resources and improving crop productivity. The transition to so-called "agriculture 4.0" represents a revolution in the way technology is applied in the field, with an emphasis on digital and automated solutions such as UAVs (Unmanned Aerial Vehicles). These devices offer new capabilities for capturing high-resolution images, enabling... F. Pereira de souza, L. Shiratsuchi, H. Tao, M. Acconcia dias, M. Barbosa, T. deri setiyono, S. Campos |