Proceedings
Authors
| Filter results27 paper(s) found. |
|---|
1. Spectral Models for Estimation of Chlorophyll Content, Nitrogen, Moisture Stress and Growth of Wheat CropField experiments were conducted during 2009-10 and 2010-11 at research farm of the department of Farm Machinery and Power Engineering, Punjab Agricultural university, Ludhiana. Three wheat ... B.S. Sekhon, J. Mukherjee, A. Sharma, S.K. Thind, R. Kaur, M.S. Makkar |
2. Development of Ground Based Multi-source Crop Information Collection System.Precision agriculture requires reliable technology to acquire accurate information on crop conditions. A ground-based integrated sensor and instrumentation system was developed to measure real-time crop conditions. The integration system included multispectral camera and N-sensor for real time Nitrogen application. The system was interfaced with a DGPS receiver to provide spatial coordinates for sensor readings. Before mounting of the sensors on modified paddy transplanter, different mountings... A. Sharma, M.S. Makkar, S. Gupta |
3. Towards a Multi-Source Record Keeping System for Agricultural Product TraceabilityAgricultural production record keeping is the basis of traceability system. To resolve the problem including single method of information acquisition, weak ability of real-time monitoring and low credibility of history information in agricultural production process, the... C. Sun, Z. Ji, J. Qian, M. Li, L. Zhao, W. Li, C. Zhou, X. Du, J. Xie, T. Wu, L. Qu, L. Hao, X. Yang |
4. Modeling and Decision Support System for Precision Cucumber Protection in GreenhousesThe plant disease... X. Yang, C. Sun, J. Qian, Z. Ji, S. Qiao, M. Chen, C. Zhao, M. Li |
5. Evaluation of the Sensor Suite for Detection of Plant Water Stress in Orchard and Vineyard CropsA mobile sensor suite was developed and evaluated to predict plant water status by measuring the leaf temperature of nut trees and grapevines. It consists of an infrared thermometer to measure leaf temperature along with relevant ambient condition sensors to measure microclimatic variables in the vicinity of the leaf. Sensor suite was successfully evaluated in three crops (almonds, walnuts and grapevines) for both sunlit and shaded leaves. Stepwise linear regression models developed for shaded... R. Dhillon, V. Udompetaikul, F. Rojo, S. Upadhyaya, D. Slaughter, B. lampinen, K. Shackel |
6. Investigation Of Crop Varieties At Different Growth Stages Using Optical Sensor DataCotton, soybean and sorghum are economically important crops in Texas. Knowing the growing status of crops at different stages of growth is crucial to apply site-specific management and increase crop yield for farmers. Field experiments were initiated to measure cotton, soybean and sorghum plants growth status and spatial variability through the whole growing cycle. A ground-based active optical sensor, Greenseeker®, was used to collect the Normalized Difference Vegetation Index (NDVI) data... H. Zhang, Y. Lan, J. Westbrook, C. Suh, C. Hoffmann, R. Lacey |
7. The Use Of A Ground Based Remote Sensor For Winter Wheat Grain Yield Prediction In Northern PolandThe aim of the research was to investigate if algorithms developed for winter wheat, cv. Trend, yield predictions, based on ground measured GNDVI, differ significantly between 2 sequent years. The research was conducted in Pomerania, northern Poland (54° 31' N 17° 18' E) on sandy loam soils. The strip-trial design was used to compare the effect of 6 N treatments: 0, 50, 100, 150, 200 and 250 kg ha-1, applied as one dose at the beginning... S.M. Samborski, D. Gozdowski, S.E. Dobers |
8. Development Of Batch Type Yield Monitor For Small FieldsAbstract The yield monitor is intended to give the user an accurate assessment of yield variations y within a field. A yield monitor can assist grain producers in many aspects of crop management. A yield monitor by itself can provide useful information and enhance on-farm research. Yield data can... M. Singh, A. Sharma, G. Singh, P. Fixen |
9. Traceability And Management Information System Of Agricultural Product Quality Safety In ChinaAgricultural product quality safety is the hot topic in the world. From the technical view, the agricultural production management and traceability are the key measurement for insuring the quality safety. From 2005 until now, we have been investigating... X. Yang, M. Li, C. Sun, J. Qian, Z. Ji |
10. Development Of A Sensor Suite To Determine Plant Water PotentialThe goal of this research was to develop a mobile sensor suite to determine plant water status in almonds and walnuts. The sensor suite consisted of an infrared thermometer to measure leaf temperature and additional sensors to measure relevant ambient conditions such as light intensity, air temperature, air humidity, and wind speed. In the Summer of 2009, the system was used to study the relationship between leaf temperature, plant water status, and relevant microclimatic information in an almond... V. Udompetaikul, S. Upadhyaya, B. Lampinen, D. Slaughter |
11. Production And Conservation Results From A Decade-Long Field-Scale Precision Agriculture SystemResearch is needed that simultaneously evaluates production and conservation outcomes of precision agriculture practices. From over a decade (1993-2003) of yield and soil mapping and water quality assessment, a multi-faceted, “precision agriculture system” (PAS) was developed and initiated in 2004 on a 36-ha field in Central Missouri. The PAS assessment was accomplished by comparing it to the previous decade of conventional corn-soybean... C. Baffaut, K. Sudduth, J. Sadler, R. Kremer, R. Lerch, N. Kitchen, K. Veum |
12. Heavy Metal PB2+ Pollution Detection In Soil Using Terahertz Time-domain Spectroscopy For Precision AgricultureSoil is an important natural resource for human beings. With the rapid development of modern industry, heavy metals pollution in soil has made prominent influences on farmland environment. It was reported that, one fifth of China's cultivated lands and more than 217,000 farms in the US have been polluted at different levels by heavy metals. The crop grows in the polluted soil and the heavy metal ions transfer from soil to the plant and agro-products. As a result, the crop yield... C. Zhao, B. Li |
13. Are Thermal Images Adequate For Irrigation Management?Thermal crop sensing technologies have potential as tools for monitoring and mapping crop water status, improving water use efficiency and precisely managing irrigation. As thermal sensors and imagers became more affordable, various platforms were examined to allow for canopy- and field-scale acquisitions of canopy temperature and to extract maps of water status variability. Various canopy temperature statistics and crop water stress index (CWSI) were used to estimate water status... O. Rosenberg, V. Alchanatis, Y. Saranga, A. Bosak, Y. Cohen |
14. Estimation Of Nitrogen And Chlorophyll Content In Wheat Crop Using Hand Held SensorsA Field experiment was conducted to estimate crop nitrogen (N) status and chlorophyll content in wheat crop by using chlorophyll content meter(Apogee’s CCM-200) and N-Tester® (Make YARA International). The experiment was conducted by sowing university recommended wheat variety viz. PBW 550 with 5 nitrogen levels i.e. 0, 30, 60, 90, 120 & 150 kg N/ha. It was found that at tillering stage when nitrogen rates were increased from 0 to 150 kg ha-1 , the... M.S. Makkar, A. Kaul, R. Kumar, A. Sharma, B.S. Sekhon, C.S. Pannu |
15. Crop Circle Sensor-Based Precision Nitrogen Management Strategy For Rice In Northeast ChinaGreenSeeker (GS) sensor-based precision N management strategy for rice has been developed, significantly improved N fertilizer use efficiency. Crop Circle ACS-470 (CC) active sensor is a new user configurable sensor, with a choice of 6 possible bands. The objectives of this study were to identify important vegetation indices obtained from CC sensor for estimating rice yield potential and rice responsiveness to topdressing N application and evaluate their potential improvements over GS normalized... Q. Cao, Y. Miao, J. Shen, S. Cheng, R. Khosla, F. Liu |
16. Design And Construction Of An Ultrasonic Cutting Width Sensor For Full-Feed Type Mid-Sized Multi-Purpose CombinesPrecision agriculture analyzes the spatial variability according to the characteristics of an optimum setting of agricultural materials. To raise the profitability of agriculture and to reduce the environmental impact, technological research and development of precision agriculture has been conducted. In Asian countries such as Japan... Y. Huh, S. Chung, Y. Chae, J. Lee, S. Kim, M. Choi, K. Jung |
17. In-field Plant Phenotyping Using Multi-view Reconstruction: an Investigation in EggplantRapid methods for plant phenotyping are a growing need in agricultural research to help accelerate improvements in crop performance in order to facilitate more efficient utilization of plant genome sequences and the corresponding advancements in associated methods of genetic improvement. Manual plant phenotyping is time-consuming, laborious, frequently subjective, and often destructive. There is a need for building field-deployable systems with advanced sensors that have both high-speed and high-performance... T. Nguyen, D. Slaughter, B. Townsley, L. Carriedo, J. Maloof, N. Sinha |
18. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
19. A Decade of Precision Agriculture Impacts on Grain Yield and Yield VariationTargeting management practices and inputs with precision agriculture has high potential to meet some of the grand challenges of sustainability in the coming century, including simultaneously improving crop yields and reducing environmental impacts. Although the potential is high, few studies have documented long-term effects of precision agriculture on crop production and environmental quality. More specifically, long-term impacts of precision conservation practices such as cover crops, no-tillage,... M.A. Yost, N. Kitchen, K. Sudduth, S. Drummond, J. Sadler |
20. Sensor Comparison for Yield Monitoring Systems of Small-Sized Potato HarvestersYield monitoring of potato in real time during harvesting would be useful for farmers, providing instant yield and income information. In the study, potentials of candidate sensors were evaluated with different yield measurement techniques for yield monitoring system of small-sized potato harvesters. Mass-based (i.e., load cell) and volume-based (i.e., CCD camera) sensors were selected and tested under laboratory conditions. For mass-based sensing, an impact plate instrumented with load cells... K.M. Swe, Y. Kim, D. Jeong, S. Lee, S. Chung, M.S. Kabir |
21. Autonomous Mapping of Grass-Clover Ratio Based on Unmanned Aerial Vehicles and Convolutional Neural NetworksThis paper presents a method which can provide support in determining the grass-clover ratio, in grass-clover fields, based on images from an unmanned aerial vehicle. Automated estimation of the grass-clover ratio can serve as a tool for optimizing fertilization of grass-clover fields. A higher clover content gives a higher performance of the cows, when the harvested material is used for fodder, and thereby this has a direct impact on the dairy industry. An android application... D. Larsen, S. Skovsen, K.A. Steen, K. Grooters, O. Green, R.N. Jørgensen, J. Eriksen |
22. Evaluation of Image Acquisition Parameters and Data Extraction Methods on Plant Height Estimation with UAS ImageryAerial imagery from unmanned aircraft systems (UASs) has been increasingly used for field phenotyping and precision agriculture. Plant height is one important crop growth parameter that has been estimated from 3D point clouds and digital surface models (DSMs) derived from UAS-based aerial imagery. However, many factors can affect the accuracy of aerial plant height estimation. This study examined the effects of image overlap, pixel resolution, and data extraction methods on estimation... C. Yang, C. Suh, W. Guo, H. Zhao, J. Zhang, R. Eyster |
23. Identifying Key Factors Influencing Yield Spatial Pattern and Temporal Stability for Management Zone DelineationManagement zone delineation is a practical strategy for site-specific management. Numerous approaches have been used to identify these homogenous areas in the field, including approaches using multiple years of historical yield maps. However, there are still knowledge gaps in identifying variables influencing spatial and temporal variability of crop yield that should be used for management zone delineation. The objective of this study is to identify key soil and landscape properties affecting... L.N. Lacerda, Y. Miao, K. Mizuta, K. Stueve |
24. Is Row-unit Vibration Affected by Planter Speeds and Downforce?Row-unit vibration is an issue created mainly by planter`s opening disks and gauge-wheels contact with the ground. Variability on row-unit vibration could interfere on seed metering and delivery process, affecting crop emergence and final stand. With the amount of embedded technology present on planters, producers are being encouraged to increase planting speeds, which is also one of the main factors for row-unit vibration increasement. In this way, knowing the proper speeds, and using other instruments... L.P. Oliveira, B.V. Ortiz, G.T. Morata, T. Squires, J. Jones |
25. Diagnosis of Grapevine Nutrient Content Using Proximal Hyperspectral ImagingNutrient deficiencies on grapevines could affect the fruit yield and quality, which is a major concern in vineyards. Nutrient deficiencies may be recognizable by foliar symptoms that vary by mineral nutrient and stress severity, but it is too late to manage when visible deficiency symptoms become apparent. The nutrient analysis in the laboratory is the way to get an accurate result, but it is time and cost-intensive. The differences in leaf nutrient levels also alter spectral characteristics outside... C. Kang, M. Karkee, Q. Zhang, N. Shcherbatyuk, P. Davadant, M. Keller |
26. Influence of Ground Control Points and Processing Parameters on UAS Image Mosaicking for Plant Height EstimationDigital surface models (DSMs) and 3D point clouds, generated using overlapping images from unmanned aircraft systems (UASs), are often used for plant height estimation in phenotyping and precision agriculture. This study examined the effects of the quantity and placement of ground control points (GCPs) and image processing parameters on the creation of DSMs and 3D point clouds for plant height estimation. A 2-ha field containing multiple experimental plots with four crops (corn, cotton, sorghum,... C. Yang, H. Zhao, W. Guo, J. Zhang, C. Suh, B.K. Fritz |
27. Within-field Spatial Variability in Optimal Sulfur Rates for Corn in Minnesota: Implications for Precision Sulfur ManagementThe ongoing decline in sulfur (S) atmospheric depositions and high yield crop production have resulted in S deficiency and the need for S fertilizer applications in corn cropping systems. Many farmers are applying S fertilizers uniformly across their fields. Little has been reported on the within-field spatial variability in optimal S rates and the potential benefits of variable rate S applications. The objectives of this study were to 1) assess within-field variability of optimal S rates (OSR),... R.P. Negrini, Y. Miao, K. Mizuta, K. Stueve, D. Kaiser, J.A. Coulter |