Proceedings
Authors
| Filter results20 paper(s) found. |
|---|
1. Tools For Evaluating The Potential Of Automatic Section ControlOne of the newest technologies in precision agriculture is automatic section control on application equipment. This technology has tremendous potential to reduce wasted inputs, especially on irregularly shaped fields. Paybacks are not necessarily as great on rectangular fields. Producers considering adoption of the technology need to decide whether they will receive sufficient payback for their field shapes. They must also decide... T. Stombaugh, R.S. Zandonadi, J.D. Luck, T.P. Mcdonald, T. Mcgraw |
2. Cotton Precision Farming Adoption In The Southern United States: Findings From A 2009 SurveyThe objectives of this study were 1) to determine the status of precision farming technology adoption by cotton producers in 12 states and 2) to evaluate changes in cotton precision farming technology adoption between 2000 and 2008. A mail survey of cotton producers located in Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, Missouri, North Carolina, South Carolina, Tennessee, Texas and Virginia was conducted in February and March of 2009 to establish the use of precision farming technologies... M. Velandia, D.F. Mooney, R.K. Roberts, B.C. English, J.A. Larson, D.M. Lambert, S.L. Larkin, M.C. Marra, R. Rejesus, S.W. Martin, K.W. Paxton, A. Mishra, C. Wang, E. Segarra, J.M. Reeves |
3. Tip Flow Uniformity When Using Different Automatic Section Control Technologies During Field OperationsAutomatic section control (ASC) technology provides a means to reduce double-coverage and application in unwanted areas thereby leading to input savings and improved environmental stewardship. However, the impact of ASC on spray boom dynamics and tip flow uniformity are unknown. Therefore, a study was conducted to evaluate tip flow rate uniformity and control system response in maintaining target application rates during field operation. Field experiments were conducted using two self-propelled... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, T.P. Mcdonald, D. Mullenix |
4. Application Rate Stability When Implementing Automatic Section Control Technology On Agricultural SprayersAutomatic section control (on and off) technology of sprayer boom sections is an intelligent solution to maximize spray application efficiency during field operations. This technology can reduce over-application of products. Spray controllers available with this technology attempt to maintain the set target rate by adjusting system flow rate based on ground speed and application width. Therefore, as sections are turned on or off, the flow regulating hardware must respond to maintain... A. Sharda, J.D. Luck, J.P. Fulton, S.A. Shearer, S.A. Shearer, D. Mullenix, M. Vanacht |
5. Generating Herbicide Effective Application Rate Maps Based On GPS Position, Nozzle Pressure, And Boom Section Actuation Data Collected From Sprayer Control SystemsThe application of pre- and post- emergence burn-down herbicides (i.e., glyphosate) continues to increase as producers attempt to reduce both negative environmental impacts from tillage and input costs from labor, machinery and materials. The use of precision agriculture technologies such as automatic boom section control allows producers to reduce off-target application when applying herbicides. While automatic boom section control has provided benefits, pressure differences across... J.D. Luck, A. Sharda, S.K. Pitla, J.P. Fulton, S.A. Shearer |
6. Adoption And Perceived Usefulness Of Precision Soil Sampling Information In Cotton ProductionSoil testing assists farmers in identifying nutrient variability to optimize input placement and timing. Anecdotal evidence suggests that soil test information has a useful life of 3–4 years. However, perceived usefulness may depend on a variety of factors, including field variability, farmer experience and education, farm size, Extension, and factors indirectly related to farming. In 2009, a survey of cotton farmers in 12 Southeastern states collected information... D.C. Harper, D.M. Lambert, B.C. English, J.A. Larson, R.K. Roberts, M. Velandia, D.F. Mooney, S.L. Larkin |
7. Spray Pattern and Droplet Spectra Characteristics from an Actively Controlled Variable-Orifice Nozzle... M.P. Sama, S.A. Shearer, J.D. Luck |
8. Rapid Identification of Mulberry Leaf Pests Based on Near Infrared Hyperspectral ImagingAs one of the most common mulberry pests, Diaphania pyloalis Walker (Lepidoptera: Pyralididae) has occurred and damaged in the main sericulture areas of China. Naked eye observation, the most dominating method identifying the damage of Diaphania pyloalis, is time-wasting and labor consuming. In order to improve the identification and diagnosis efficiency and avoid the massive outbreak of Diaphania pyloalis, near infrared (NIR) hyperspectral imaging technology combined with partial least discriminant... L. Yang, L. Huang, L. Meng, J. Wang, D. Wu, X. Fu, S. Li |
9. Development and Evaluation of a Novel Variable-orifice Nozzle Flow and Droplet Size Control SystemSpray drift from crop production operations has been a critical concern across the U.S. as evidenced by the EPA’s efforts to mitigate pesticide drift. Recently, a novel spray control system was developed and evaluated which provided real-time control of both spray droplet size and flow rate. This was achieved via electromechanical control of a variable orifice nozzle along with a novel control system which incorporates real-time weather data to vary system pressure and orifice size and shape.... T. Monroe, J.D. Luck, S. Marx |
10. Determining Site-Specific Soybean Optimal Seeding Rate Using On-Farm Precision ExperimentationTen on-farm precision experiments were conducted in Nebraska during 2018 – 2022 to address the following: i) determine the Economic Optimal Seeding Rates (EOSR), ii) identify the most important site-specific variables influencing the optimal seeding rates for soybeans. Seeding rates ranged from 200,000 to 440,000 seeds ha-1, and treatments were randomized and replicated in blocks across the entire field. The study was implemented using a variable rate prescription. Yield... M.M. Dalla betta, L. Puntel, L. Thompson, T. Mieno, J.D. Luck, N. Cafaro la menza, P. Paccioretti |
11. Sensor Based Fertigation ManagementSensor-based fertigation management (SBFM) is a relatively new technology for directing nitrogen (N) decisions, specifically tailored for delivery of N via center pivot irrigation systems (fertigation). The development of SBFM began in 2018 at the University of Nebraska-Lincoln with the help of cooperating producers across the state. Over two dozen field sites provided testbeds for the development and evaluation of the technology. The key technique in this fertigation approach is the... J. Stansell, J.D. Luck, T. Cross, K.J. Bathke, T. Smith |
12. Onboard Weed Identification and Application Test with Spraying Drone SystemsCommercial spraying drone systems nowadays have the ability to implement variable rate applications according to pre-loaded prescription maps. Efforts are needed to integrate sensing and computing technologies to realize on-the-go decision making such as those on the ground based spraying systems. Besides the understudied subject of drone spraying pattern and efficacy, challenges also exist in the decision making, control, and system integration with the limits on payload and flight endurance... Y. Shi, M. Islam, K. Steele, J.D. Luck, S. Pitla, Y. Ge, A. Jhala, S. Knezevic |
13. In-Season Nitrogen Management: Leveraging Data Visualization for Precision AgricultureThe agricultural sector nitrogen management-related research has been extensively high by experiencing a data revolution, with an increasing influx of information from diverse sources like sensors, satellites, and Unmanned Aerial Vehicles (UAVs) imaging technologies. In this context, effective in-season nitrogen data management has become a critical factor; however, the ability of farmers to visualize the impact of such technologies in field research settings has been limited. This project... C. Narayana, S. vanderplas, K.J. Bathke, J.D. Luck |
14. Pesticide Application Management Toolset for Improved Worker ProtectionThe practice of pesticide use has been widely adopted by production agriculture to maximize yields since the 1950s. Even though it provides beneficial economic returns to the farmers, it also enhances the risk of environmental pollution and is directly associated with the risk of poisoning to agricultural workers. While adhering to United States Federal Environmental Protection Agency (EPA) Worker Protection Standard (WPS) guidelines, the current systems need considerable time to provide crucial... C. Narayana, N. Thorson, J.D. Luck |
15. A Multi-level Filtering Approach for Yield Data Cleaning and Automated Analysis Using R ProgrammingIn the realm of on-farm studies, a recurring challenge surfaces in the form of disparities between field implementation and experimental design within Rx treatment plots. This disjunction underscores the critical need for intensive data cleaning and analysis to generate precise outcomes for the experiments. Complicating matters is the absence of readily available ground truth data for comparative analyses, making it particularly challenging to ascertain the extent of necessary data cleaning and... S. Vinod, J.D. Luck |
16. AIR-N: AI-Enabled Robotic Precision Nitrogen Management PlatformThe AI-Enabled Robotic Nitrogen Management (AIR-N) system is a versatile, cloud-based platform designed for precision nitrogen management in agriculture, targeting the reduction of nitrous oxide emissions as emphasized by the EPA. This end-to-end integrated system is adaptable to various cloud services, enhancing its applicability across different farming environments. AIR-N's framework consists of three primary components: a sensing layer for gathering data, a cloud layer where AI and machine... A. Kalra, S. Pitla, J.D. Luck |
17. Driving Growth Through Precision Agriculture: the Evolution of the Nebraska On-farm Research NetworkThe Nebraska On-Farm Research Network (NOFRN), allows farmers to answer production, profitability and sustainability questions in their own field. The University of Nebraska (USA) sponsors the NOFRN and provides technical support in the experimental design, execution, data analysis and results dissemination. In recent years, precision agriculture technologies have expanded network capabilities through an increasing number of experiments and provided new avenues for data analyses. The goal is... G. Balboa, B. Tobaldo, T. Lexow, J.D. Luck |
18. Fertigation Management Strategies Effect on Residual Nitrates in the Soil Profile and Ground WaterNitrogen is an input that is vital for growth and productivity within the corn belt states of the U.S. However, when nitrogen as an input into agricultural cropping systems is often over-applied and thus not optimally utilized by the cropping system. Therefore, it is at risk of loss within the environment through processes of leaching, denitrification, and volatilization. This is a major concern in Nebraska, as the reality is that much of the state’s groundwater has been contaminated with... K.J. Bathke, T. Cross, J.D. Luck |
19. Enhancing Nutrient-related Stress Detection: High Throughput Phenotyping and Image Analysis for Improved PrecisionIn the 21-century agriculture has the unique responsibility to provide food, fuel, fiber and feed for the growing population under the stress of climate change and diminishing natural resources. A feat that will take considerable change to the sustainability of such practices. One of which is the idea of assessing phenotypic expression of complex traits in response to environmental factors. This idea elevates the use of phenotyping to quantitatively monitor stress manifestation. Therefore,... K.J. Bathke, Y. Ge, S.D. Choudhury, J.D. Luck |
20. University of Nebraska-Lincoln - Sponsor Presentation... J.D. Luck |