Proceedings
Authors
| Filter results4 paper(s) found. |
|---|
1. Accounting For Spatial Correlation Using Radial Smoothers In Statistical Models Used For Developing Variable-rate Treatment PrescriptionsVariable-rate treatment prescriptions for use on commercial farms can be developed from embedded field trials on those farms. Such embedded trials typically involve non-random, high-density sampling schemes that result in large datasets and response variables exhibiting spatial correlation. In order to accurately evaluate the significance of the effects of the applied treatments and the measured field characteristics on the response of interest, this spatial correlation must be accounted for in... K.S. Mccarter, E. Burris |
2. Introducing An Integrated Framework To Optimize Cotton Variable Rate Irrigation In Humid RegionsManagement of supplemental irrigation in humid regions is critical because both over and under estimation of the irrigation water requirement can cause cotton lint yield reduction. Spatial variation of the soil physical characteristics is significant in west Tennessee hence precision irrigation strategies should be applied to achieve the optimum lint yield. Despite the significant enhancement in instrumentation and measurements, there are several challenges that need to... A. Haghverdi, B.G. Leib |
3. Prediction of Nitrogen Needs with Nitrogen-rich Strips and Ramped Nitrogen StripsBoth nitrogen rich strips and ramped nitrogen strips have been used to estimate topdress nitrogen needs for winter wheat based on in-season optical reflectance data. The ramped strip system places a series of small plots in each field with increasing levels of nitrogen to determine the application rate at which predicted yield response to nitrogen reaches a plateau. The nitrogen-rich strip system uses a nitrogen fertilizer optimization algorithm based on optical reflectance measures from the nitrogen-rich... D.C. Roberts, B.W. Brorsen, W.R. Raun, J.B. Solie |
4. Controller Performance Criteria for Sensor Based Variable Rate ApplicationSensor based variable rate application of crop inputs provides unique challenges for traditional rate controllers when compared to map based applications. The controller set point is typically changing every second whereas with a map based systems the set point changes much less frequently. As applied data files for a sensor based variable rate nitrogen applicator were obtained from a wheat field in north central Oklahoma. These data were analyzed to determine the magnitude and frequency of rate... R.K. Taylor, P. Bennur, J.B. Solie, N. Wang, P. Weckler, W.R. Raun |