Proceedings
Authors
| Filter results65 paper(s) found. |
|---|
1. A Case Study For Variable-rate Seeding Of Corn And Cotton In The Tennessee Valley Of AlabamaFarmers have recently become more interested in implementing variable-rate seeding of corn and cotton in Alabama due to increasing seed costs and the potential to maximize yields site-specifically due to inherent field variability. Therefore, an on-farm case study was conducted to evaluate the feasibility of variable-rate seeding for a corn and cotton rotation. ... S.H. Norwood, J.P. Fulton, A.T. Winstead, J.N. Shaw, D. Rodekohr, C.J. Brodbeck, T. Macy |
2. Development Of Ground-based Sensor System For Automated Agricultural Vehicle To Detect Diseases In Citrus PlantationsAn integrated USDA-funded project involving Carnegie Mellon University, University of Florida, Cornell University and John Deere is ongoing, to develop an autonomous tractors for sustainable specialty crop farming. The research teams have come together to develop an automated system for detecting plant stress, estimating yields, and reducing chemical usage through precision spraying for specialty crops. The goals of the automation process are to reduce the tractor-related labor costs, reduce... S. Sankaran, R. Ehsani, A. Mishra, C. Dima |
3. Affordable Multi-Rotor Remote Sensing Platform for Applications In Precision Horticulture.Satellite and aerial imaging technologies have been explored for a long time as an extremely useful source of collecting cost-effective data for agricultural applications. In spite of the availability of such technologies, very few growers are using the technology... R. Ehsani, S. Sankaran, J.M. Maja, J.C. Neto |
4. Comparison and Evaluation of Spray Characteristics of Three Types of Variable-Rate SprayFor the present developing direction of "low-input sustainable agriculture", variable-rate technology is increasingly concerned in agricultural engineering field. The technology of variable-rate precision chemical application is the typical of variable-rate technology. In China, agro-chemical production technology has reached the international advanced level, but the chemical application... C. Zhao, J. Zhou, W. Deng |
5. Application of RS, GPS & GIS in a National Monitoring System for Accurate Range AssessmentSustainable use of rangelands requires information on vegetation cover and its changes through time, condition trend and the effect of climate as well as management practices. The main objective of this research was showing variation of vegetation parameters,... H.P. Arzani, M.S. Azimi, S.D. kaboli, H.M. mirdavodi, M.M. Borhani, J.M. Abdollahi, M.D. farahpour |
6. Remote Sensing Imagery Based Agricultural Land Pattern Extraction around Miyajimanuma WetlandThis research aimed to extract agricultural land use pattern around the Miyajimanuma wetland, Hokkaido, Japan. By combining the image segmentation technology - watershed transform and image classification technology- particle swarm optimization (PSO)-k-means based minimum distance classifier, a new method for extracting the agricultural land use information based... R. Mochizuki, I. Han-ya, N. Noguchi, B. Su, K. Ishii |
7. Study on Monitoring System of Wheat SowingIn order to real-time monitoring the sowing status of the multi-channel seeder, a distributed monitoring system is developed. The monitoring module of sowing and the monitoring terminal is designed with ... W. Fu, Z. Meng, G. Wu, J. Dong, H. Mei, C. Zhao |
8. The Spatial And Temporal Variability Analysis Of Wheat Yield in suburban of BeijingAbstract: The yield map is the basis of the fertilization maps and plant maps. In order to diagnose the cause of variation accurately, not only the spatial variation of annual yield data, but also the successive annual yield data of temporal variability should be understood.The introduction of yield monitor system, global positioning system (GPS), and geographic information system have provided new methods to obtain wheat yield in precision agriculture.... Z. Meng, Z. Wang, G. Wu, W. Fu, X. An |
9. Study On Plant Health Condition Monitoring Using Acoustic Radiation ForceIn recent years, irrigation method using the negative pressure difference attracts attention from the point of view of water saving. In addition, it is proved that this technique is effective in upbringing of the plant as well as saving of water. By measuring water distribution of soil, active irrigation control will be performed In our previous study, we confirmed that the resonance frequency of a leaf is influenced by the water stress to the plant. Thus the vibration measurement... Y. Nakagawa, M. Sano, T. Shirakawa, K. Yamagishi, T. Sugihara, M. Ohaba, S. Shibusawa, T. Sugimoto |
10. Design Of ECU Monitoring System For Agricultural Vehicle Based On ISO 11783International standard for implementation of electronic control unit (ECU) in agricultural tractors has been requirement for inter-operation compatibility of various agricultural vehicles. The ISO 11783 standard is basically based on communication technology designated using the controller area network (CAN), it is typical standard technology for implementation of ECU in agricultural vehicle. CAN bus Communication system was developed to the distribution control of ECUs to... W. Yang , S. Kim, J. Moon, D. Kim |
11. X-Ray Computed Tomography For State Of The Art Plant And Root AnalysisDuring the last years, the formerly in medical applications established technique of X-ray computed tomography (CT) is used for non-destructive material analysis as well. Adapting this technique for the visualization and analysis of growth processes of plants above and underneath the soil enables new possibilities in the so called smart agriculture. Using State-of-the-art CT systems the computed 3D volume datasets allows the visualization and virtual analysis of hidden structures like roots... S. Reisinger, N. Uhlmann, R. Hanke, S. Gerth |
12. Development Of An Hydraulic Penetrometer Data Acquisition SoftwareCurrently , in addition to increased production , the costs reduction are focused in order to increase efficiency in production, so the modern agriculture intent to find planting methods which extract the maximum possible data about the used area for making possible to do this preparation in the most appropriate manner, considering the shortcomings of evaluating these data. This method is contained in the concepts of an agricultural practice that has been steadily growing, the... I. Marasca, D.P. Casiero, S.P. Guerra, K.P. Lanças, E.R. Spadim |
13. Spatial Dependence Of Soil Compaction In Annual Cycle Of Different Culture Of Cane Sugar For Sandy SoilThe Currently practiced mechanization for the production of sugar cane involves a heavy traffic of machinery and equipment. Studying the culture in its development environment generates a huge amount of information to fit the top managements and varieties for specific environments. The sugar cane cultivation has a heavy traffic of machinery and equipment, having more than 20 operations per cycle, and being more intense during harvest, providing increasing... I. Marasca, F.C. Masiero, D.A. Fiorese, S.S. Guerra, K.P. Lancas |
14. Rapid Sensing For Water Stress Detection In Foxtail Millet (Setaria Italica)In recent years, the drought conditions due to changing climate patterns have adversely affected the U.S. agriculture. The 2012 drought that damaged major crops in Midwest was one of the most severe in last 25 years. It has resulted in losses of production, revenue, livestock and jobs, and has increased food prices. Under these circumstances, farmers are focused to use the water resources carefully. The researchers are working together to develop new crop varieties resistant to water... S. Sankaran, M. Wang, P. Ellsworth, A. Cousins |
15. Design And Construction Of An Ultrasonic Cutting Width Sensor For Full-Feed Type Mid-Sized Multi-Purpose CombinesPrecision agriculture analyzes the spatial variability according to the characteristics of an optimum setting of agricultural materials. To raise the profitability of agriculture and to reduce the environmental impact, technological research and development of precision agriculture has been conducted. In Asian countries such as Japan... Y. Huh, S. Chung, Y. Chae, J. Lee, S. Kim, M. Choi, K. Jung |
16. Basic Tests Of pH And EC Probes For Automatic Real Time Nutrient Control In Protected Crop ProductionResearch on greenhouse and plant factory has been actively conducting to provide a stable growth environment. In plant factory, EC concentration (EC) and acidity (pH) of nutrient have a significant impact on physiological and morphological of plant. Therefore, EC and pH are important element for automatic control of nutrient solution. In this study, performance pH and EC sensors was evaluated for the responsiveness, accuracy and displacement. This study includes development of environmental... Y. Choo, S. Chung, Y. Huh, Y. Kim, S. Jang, K. Jung |
17. Unmanned Aerial System Applications In Washington State AgricultureThree applications of unmanned aerial systems (UAS) based imaging were explored in row, field, and horticultural crops at Washington State University (WSU). The applications were: to evaluate the necrosis rate in potato field crop rotation trials, to quantify the emergence rates of three winter wheat advanced yield trials, and detecting canker disease-infection in pear. The UAS equipped with green-NDVI imaging was used to acquire field aerial images. In the first application,... L. Khot, S. Sankaran, D. Johnson, A. Carter, S. Serra, S. Musacchi, T. Cummings |
18. Use Of Active Radiometers To Estimate Biomass, Leaf Area Index, And Plant Height In CottonActive radiometers have been tested extensively as tools to assess in-season nitrogen (N) status of crops like wheat (Triticum aestivum), corn (Zea mays), and cotton (Gossypium hirsutum). Fewer studies target in-season plant growth parameters such as biomass, plant height or leaf area index (LAI). Uses of this plant data include simulation modeling, total N uptake measurements, evapotranspiration (ET) estimates and irrigation... K.R. Thorp, J.W. White, M.M. Conley, J. Mon, K.F. Bronson |
19. The Device of Air-assisted Side Deep Precision Fertilization for Rice TransplanterRice is the most important crop in China, which has the largest plant area. Fertilization is an important process of rice production, which directly affects the yield of crops, reasonable and effective use of chemical fertilizer can improve the yield of crops. At present, the mechanization level of rice fertilization is very low in China, and the artificial fertilization requires a large amount of fertilizer which caused the uneven distribution. The rice side deep fertilizing is an ideal way of... C. Zhao, G. Wu, Z. Meng, W. Fu, L. Li, X. Wei |
20. Should One Phosphorus Extraction Method Be Used for VRT Phosphorus Recommendation in the Southern Great Plains?Winter Wheat has been produced throughout the southern Great Plains for over 100 years. In most cases this continuous production of mono-culture lower value wheat crop has led to the neglect of the soils, one such soil property is soil pH. In an area dominated by eroded soils and short term leases, Land-Grant University wheat breeders have created lines of winter wheat which are aluminum tolerant to increase production in low productive soils. Now the fields in this region can have... D.B. Arnall, S. Phillips, C. Penn, P. Watkins, B. Rutter, J. Warren |
21. Weather Impacts on UAV Flight Availability for Agricultural Purposes in OklahomaThis research project analyzed 21 years of historical weather data from the Oklahoma Mesonet system. The data examined the practicality of flying unmanned aircraft for various agricultural purposes in Oklahoma. Fixed-wing and rotary wing (quad copter, octocopter) flight parameters were determined and their performance envelope was verified as a function of weather conditions. The project explored Oklahoma’s Mesonet data in order to find days that are acceptable for flying... P. Weckler, C. Morris, B. Arnall, P. Alderman, J. Kidd, A. Sutherland |
22. Field Evaluation of a Variable-rate Aerial Application SystemVariable rate aerial application systems are becoming more readily available; however, aerial applicators typically only use the systems for constant rate application of materials, allowing the systems to compensate for upwind and downwind ground speed variations. Much of the resistance to variable rate application system adoption pertains to applicator’s trust in the systems to turn on and off automatically as desired. If an application system operating in an automatic mode were... D.E. Martin, C. Yang |
23. Development of Land Leveling Equipment Based on GNSSAn attitude adjustable land leveling equipment was designed. The reference elevation of the land to be leveled was generated based on the topographic data which was acquired by the RTK-GNSS technology. The blade lifting mechanism was controlled by comparing the reference elevation and the real-time blade’s elevation and attitude data which was obtained by the dual antenna GNSS receiver and as a result the land leveling operation was implemented. A new algorithm using the electro-hydraulic... W. Fu, G. Wu, H. Bao, X. Wei, Z. Meng |
24. Measuring Height of Sugarcane Plants Through LiDAR TechnologySugarcane (Saccharum spp.) has an important economic role in Brazilian agriculture, especially in São Paulo State. Variation in the volume of plants can be an indicative of biomass which, for sugarcane, strongly relates to the yield. Laser sensors, like LiDAR (Light Detection and Ranging), has been employed to estimate yield for corn, wheat and monitoring forests. The main advantage of using this type of sensor is the capability of real-time data acquisition in a non-destructive way, previously... T.F. Canata, J.P. Molin, A.F. Colaço, R.G. Trevisan, P.R. Fiorio, M. Martello |
25. Utilizing Space-based Technology for Cotton Irrigation SchedulingAccurate soil moisture content measurements are vital to precision irrigation management. Electromagnetic sensors such as capacitance and time domain reflectometry have been widely used for measuring soil moisture content for decades. However, to estimate average soil moisture content over a large area, a number of ground-based in-situ sensors would need to be installed, which would be expensive and labor intensive. Remote sensing using the microwave spectrum (such as GPS signals) has been used... A. Khalilian, X. Qiao, J.O. Payero, J.M. Maja, C.V. Privette, Y.J. Han |
26. Use of Crop Canopy Reflectance Sensor in Management of Nitrogen Fertilization in Sugarcane in BrazilGiven the difficulty to determine N status in soil testing and lack of crop parameters to recommend N for sugarcane in Brazil raise the necessity of identify new methods to find crop requirement to improve the N use efficiency. Crop canopy sensor, such as those used to measure indirectly chlorophyll content as N status indicator, can be used to monitor crop nutritional demand. The objective of this experiment was to assess the nutritional status of the sugarcane fertilized with different nitrogen... S.G. Castro, G.M. Sanches, G.M. Cardoso, A.E. Silva, H.C. Franco, P.S. Magalhães |
27. Small UAS Integrated Sensing Tools for Abiotic Stress Monitoring in Irrigated Pinto BeansPrecision agriculture is a practical approach to maximize crop yield with optimal use of rapidly depleting natural resources. Availability of specific and high resolution crop data at critical growth stages is a key for real-time data driven decision support for precision agriculture management during the production season. The goal of this study was to evaluate the feasibility of using small unmanned aerial system (UAS) integrated remote sensing tools to monitor the abiotic stress of eight irrigated... L. Khot, J. Zhou, R. Boydston, P.N. Miklas, L. Porter |
28. Field-scale Nitrogen Recommendation Tools for Improving a Canopy Reflectance Sensor AlgorithmNitrogen (N) rate recommendation tools are utilized to help producers maximize grain yield production. Many of these tools provide recommendations at field scales but often fail when corn N requirements are variable across the field. This may result in excess N being lost to the environment or producers receiving decreased economic returns on yield. Canopy reflectance sensors are capable of capturing within-field variability, although the sensor algorithm recommendations may not always be as accurate... C.J. Ransom, M. Bean, N. Kitchen, J. Camberato, P. Carter, R. Ferguson, F. Fernandez, D. Franzen, C. Laboski, E. Nafziger, J. Sawyer, J. Shanahan |
29. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
30. Toward Geopolitical-Context-Enabled Interoperability in Precision Agriculture: AgGateway's SPADE, PAIL, WAVE, CART and ADAPTAgGateway is a nonprofit consortium of 240+ businesses working to promote, enable and expand eAgriculture. It provides a non-competitive collaborative environment, transparent funding and governance models, and anti-trust and intellectual property policies that guide and protect members’ contributions and implementations. AgGateway primarily focuses on implementing existing standards and collaborating with other organizations to extend them when necessary. In 2010 AgGateway identified... R. Ferreyra, D.B. Applegate, A.W. Berger, D.T. Berne, B.E. Craker, D.G. Daggett, A. Gowler, R.J. Bullock, S.C. Haringx, C. Hillyer, T. Howatt, B.K. Nef, S.T. Rhea, J.M. Russo, S.T. Nieman, P. Sanders, J.A. Wilson, J.W. Wilson, J.W. Tevis, M.W. Stelford, T.W. Shearouse, E.D. Schultz, L. Reddy |
31. Climate Sensitivity Analysis on Maize Yield on the Basis of Precision Crop ProductionIn this paper by prediction we have defined maize yield in precision plant production technologies according to five different climate change scenarios (Ensembles Project) until 2100 and in one scenario until 2075 using DSSAT v. 4.5.0. CERES-Maize decision support model. Sensitivity analyses were carried out. The novelty of the method presented here is that precision, variable rate technologies from relatively small areas (in our case 2500 m2) enable a large amount of data to be collected... A. Nyeki, G. Milics, A.J. Kovacs, M. Neményi, J. Kalmar |
32. Regional Usefulness of Nitrogen Management Zone Delineation ToolsIn the Northern Plains of Montana, North Dakota and Minnesota, a number of site-specific tools have been used to delineate nitrogen management zones. A three-year study was conducted using yield mapping, elevation measurements, satellite imagery, aerial Ektochrome® photography, and soil EC to delineate nitrogen management zones and compare these zones to residual fall soil nitrate. At most of the sites, variable-rate N was applied and compared with uniform N application. The site-specific... D. Franzen, F. Casey, J. Staricka, D. Long, J. Lamb, A. Sims, M. Halvorson, V. Hofman |
33. Detection of Citrus Canker in Orange Plantation Using Fluorescence SpectroscopyCitrus canker is a serious disease, caused by Xanthomonas axonopodis pv. Citri bacteria, which infects orange trees (Citrus aurantium L.), leading to a large economic loss in the orange juice production. Brazil produces 50% of the industrialized orange juice in the world. Therefore, the early detection and control of such disease is important for Brazilian economy. However this task is very hard and so far it has been done by naked eye inspection of each tree. Our goal is to... E.C. Lins, J. Belasque junior, L.G. Marcassa |
34. An Automatic Control Method Research for 9YG-1.2 Large Round BalerWhen manual or semi-automatic round baler working, the tractor driver have to frequently manual the machine according to the bale process at the same time of driving. The driver easily feel fatigue in this operating mode for a long time, so the consistency of the bale’s density can not be guaranteed. And there may be wrong operation. In this article, we use the model 9YG-1.2 large round baler as a research prototype. We study the information collection and processing of the baler’s... J. Dong, Z. Meng, Y. Cong, A. Zhang, W. Fu, R. Pan, Q. Yang, Y. Shang |
35. A Pilot Study on Monitoring Drinking Behavior in Bucket Fed Dairy Calves Using an Ear-Attached Tri-Axial AccelerometerAccelerometers support the farmer with collecting information about animal behavior and thus allow a reduction in visual observation time. The milk intake of calves fed by teat-buckets has not been monitored automatically on commercial farms so far, although it is crucial for the calves’ development. This pilot study was based on bucket-fed dairy calves and intended (1) to evaluate the technical feasibility of using an ear-attached accelerometer (SMARTBOW, Smartbow GmbH, Weibern, Austria)... L. Roland, L. Lidauer, G. Sattlecker, F. Kickinger, W. Auer, V. Sturm, D. Efrosinin, M. Drillich, M. Iwersen, A. Berger |
36. A Comparison of Three-Dimensional Data Acquisition Methods for Phenotyping ApplicationsCurrently Phenotyping is primarily performed using two-dimensional imaging techniques. While this yields interesting data about a plant, a lot of information is lost using regular cameras. Since a plant is three-dimensional, the use of dedicated 3D-imaging sensors provides a much more complete insight into the phenotype of the plant. Different methods for 3D-data acquisition are available, each with their inherent advantages and disadvantages. These have to be addressed depending on the particular... O. Scholz, F. Uhrmann, S. Gerth, K. Pieger, J. Claußen |
37. Evaluation of an Ear Tag Based Accelerometer for Monitoring Rumination Time, Chewing Cycles and Rumination Bouts in Dairy CowsThe objective of this study was to evaluate the ear tag based accelerometer SMARTBOW (Smartbow, Weibern, Austria) for detecting rumination time, chewing cycles and rumination bouts in dairy cows. For this, the parameters were determined by analyses of video recordings as reference and compared with the results of the accelerometer system. Additionally, the intra- and inter-observer reliability as well as the agreement of direct cow observations and video recordings was tested. Ten Simmental cows... M. Iwersen, S. Reiter, V. Schweinzer, F. Kickinger, M. Öhlschuster, L. Lidauer, W. Auer, M. Drillich, A. Berger |
38. Evaluation of the Ear-Tag Sensor System SMARTBOW for Detecting Estrus Events in Indoor Housed Dairy CowsLivestock farming technologies have a tremendous potential to improve and support farmers in herd management decisions, in particular in reproductive management. Nowadays, estrus detection in cows is challenging and many detection tools are available. The company Smartbow (Weibern, Austria) developed a novel ear-tag sensor, which consists of a 3D-accelerometer that records head and ear movements of cows as basis for algorithm development and further analyses. Estrus detection by the SMARTBOW system... V. Schweinzer, L. Lidauer, F. Kickinger, M. Öhlschuster, W. Auer, M. Drillich, M. Iwersen, A. Berger |
39. Changing the Cost of Farming: New Tools for Precision FarmingAccurate prescription maps are essential for effective variable rate fertilizer application. Grid soil sampling has most frequently been used to develop these prescription maps. Past research has indicated several technical and economic limitations associated with this approach. There is a need to keep the number of samples to a minimum while still allowing a reasonable level of map quality. As can be seen, precision agriculture management... P. Nagel, K. Fleming |
40. Development of Farmland-Terrain Simulation System for Consistency of Seeding DepthA farmland-terrain simulation system suitable for rugged topography was designed to study the irregularities of farmland surface morphology led by both topographic fluctuation and terrain tilt. The system consists of terrain simulation mechanism, hydraulic system, control system, etc. The terrain simulation mechanism is connected to the rack through hydraulic cylinder to simulate farmland surface fluctuation. The hydraulic system controls the hydraulic cylinder to drive the terrain simulation... W. Fu, J. Dong, Y. Cong, N. Gao, Y. Li, Z. Meng |
41. Evaluation of a Wireless Pulse Oximeter to Measure Arterial Oxygen Saturation and Pulse Rate in Newborn Holstein Friesian CalvesPulse oximetry is a well-established technique in nowadays human and veterinarian medicine. Also in the farm animal sector, it could be a useful tool to detect critical conditions of the oxygen supply and the cardiovascular system of the patient. However, its use in ruminant medicine is still limited to experimental application. The objective of this study was to evaluate the accuracy of a Radius-7 Wearable Pulse Oximeter (Masimo Corporation, Irvine, CA) for monitoring the vital parameters of... P. Kanz, S. Krieger, M. Drillich, M. Iwersen |
42. Invasive and Non-Invasive Technology for Measuring Water Content of Crop Leaves in Greenhouse HorticultureMoisture status in the crop is closely related to various physiological activities of the crop. If we can measure the moisture status in the crop in real time, we can understand the photosynthetic activity, which is an important physiological activity for growing crops, and the movement of the product from photosynthesis. Therefore, we verified it is possible to measure water content of crop leaves nondestructively using invasive method and non-invasive method. As a non-invasive measurement method,... H. Umeda, K. Muramatsu, Y. Kawagoe, T. Sugihara, S. Shibusawa, Y. Iwasaki |
43. Water Use Efficiency of Precision Irrigation System Under Critical Water-Saving ConditionNon-transpiration water loss is often neglected when evaluating water use efficiency (WUE) of precision irrigation system, due to the difficulties in determining water loss from the root zone. The objective of this study is to investigate the feasibility of a new water saving approach by controlling soil water retention around root zone during the plant growth. We grew two tomato cultivars (Anemo, Japanese variety) in an environmental controlled growth chamber, with previously oven dried and sieved... Q. Li, T. Sugihara, M. Kodaira, S. Shibusawa |
44. On-the-Go Nir Spectroscopy and Thermal Imaging for Assessing and Mapping Vineyard Water Status in Precision ViticultureNew proximal sensing technologies are desirable in viticulture to assess and map vineyard spatial variability. Towards this end, high-spatial resolution information can be obtained using novel, non-invasive sensors on-the-go. In order to improve yield, grape quality and water management, the vineyard water status should be determined. The goal of this work was to assess and map vineyard water status using two different proximal sensing technologies on-the-go: near infrared (NIR) reflectance spectroscopy... J. Tardaguila, M. Diago, S. Gutierrez, J. Fernandez-novales, E.A. Moreda |
45. Quantification of Seed Performance: Non-Invasive Determination of Internal Traits Using Computed TomographyThe application of the 3D mean-shift filter to 3D Computed Tomography Data enables the segmentation of internal traits. Specifically in maize seeds this approach gives the opportunity to separate the internal structure, for example the volume of the embryo, the cavities and the low and high dense parts of the starch body. To evaluate the mean-shift filter, the results were compared to the usage of a median-smoothing filter. To show the relevance of the mean-shift extended image pipeline an automatic... J. Claussen, N. Wörlein, N. Uhlmann, S. Gerth |
46. Innovative Assessment of Cluster Compactness in Wine Grapes from Automated On-the-Go Proximal Sensing ApplicationGrape cluster compactness affects berry ripening homogeneity, fungal disease incidence, grape composition and wine quality. Therefore, assessing cluster compactness is crucial for sorting wine grapes for the wine industry. Nowadays, cluster compactness assessing methodology is based either on visual inspection performed by trained evaluators (OIV method) or on morphological features of clusters. The goal of this work was to develop an innovative and automated, non-destructive method to assess... J. Tardaguila, F. Palacios, M. Diago, E.A. Moreda |
47. Improving Corn Nitrogen Rate Recommendations Through Tool FusionImproving corn (Zea maysL,) nitrogen (N) fertilizer rate recommendation tools can improve farmer’s profits and help mitigate N pollution. One way to improve N recommendation methods is to not rely on a single tool, but to employ two or more tools. Thiscould be thoughtof as “tool fusion”.The objective of this analysis was to improve N management by combining N recommendation tools used for guiding rates for an in-seasonN application. This evaluation was... C.J. Ransom, N.R. Kitchen, J.J. Camberato, P.R. Carter, R.B. Ferguson, F.G. Fernandez, D.W. Franzen, C.A. Laboski, E.D. Nafziger, J. Shanahan, J.E. Sawyer |
48. Analyzing Trends for Agricultural Decision Support System Using Twitter DataThe trends and reactions of the general public towards global events can be analyzed using data from social platforms, including Twitter. The number of tweets has been reported to help detect variations in communication traffic within subsets like countries, age groups and industries. Similarly, publicly accessible data and (in particular) data from social media about agricultural issues provide a great opportunity for obtaining instantaneous snapshots of farmers’ opinions and a method to... S. Jha, D. Saraswat, M.D. Ward |
49. Map Whiteboard As Collaboration Tool for Smart Farming Advisory ServicesPrecision agriculture, a branch of smart farming, holds great promise for modernization of European agriculture both in terms of environmental sustainability and economic outlook. The vast data archives made available through Copernicus and related infrastructures, combined with a low entry threshold into the domain of AI-technologies has made it possible, if not outright easy, to make meaningful predictions that divides individual agricultural fields into zones where variable rates... K. Charvat, R. Berzins, R. Bergheim, F. Zadrazil, J. Macura, D. Langovskis, H. Snevajs, H. Kubickova, S. Horakova, K. Charvat jr. |
50. N-management Using Structural Data: UAV-derived Crop Height As an Estimator for Biomass, N Concentration, and N Uptake in Winter WheatIn the last 15 years, sensors mounted on Unmanned Aerial Vehicles (UAVs) have been intensively investigated for crop monitoring. Besides known remote sensing approaches based on multispectral and hyperspectral sensors, photogrammetric methods became very important. Structure for Motion (SfM) and Multiview Stereopsis (MVS) analysis approaches enable the quantitative determination of absolute crop height and crop growth. Since the first paper on UAV-derived crop height was published by Bendig et... G. Bareth, A. Jenal, H. Hüging |
51. Optimizing Nitrogen Application to Maximize Yield and Reduce Environmental Impact in Winter Wheat ProductionField-specific fertilizer rate optimization is known to be beneficial for improving farming profit, and profits can be further improved by dividing the field into smaller plots and applying site-specific rates across the field. Finding optimal rates for these plots is often based on data gathered from said plots, which is used to determine a yield response curve, telling us how much fertilizer needs to be applied to maximize yield. In related work, we use a Convolutional Neural Network, known... A. Peerlinck, J. Sheppard, G.L. Morales luna, P. Hegedus, B. Maxwell |
52. How Digital is Agriculture in South America? Adoption and LimitationsA rapidly growing population in a context of land and water scarcity, and climate change has driven an increase in healthy, nutritious, and affordable food demand while maintaining the current cropping area. Digital agriculture (DA) can contribute solutions to meet the demands in an efficient and sustainable way. South America (SA) is one of the main grain and protein producers in the world but the status of DA in the region is unknown. This article presents the results from a systematic review... G. Balboa, L. Puntel, R. Melchiori, R. Ortega, G. Tiscornia, E. Bolfe, A. Roel, F. Scaramuzza, S. Best, A. Berger, D. Hansel, D. Palacios |
53. You Can Not Manage What You Dont MeasureThe problem of variability in soil nutrient analysis has been studied for years by a number of industry experts; unable to decipher and commercialize hyperspectral soil sensing. Many studies have taken years of testing to account for variability thathas a dramatic impacts on precision of recommendations. The main tradeoff we have identified is between accuracy and precision. Large quantities of raw data are required... K. Fleming, N. Schottle, P. Nagel, G. Koch |
54. Content Analysis of the Challenges of Using Drones in Paddy Fields in the Haraz Plain Watershed, IranDrone technology has gained popularity in recent years as a sustainable solution to changing agricultural conditions. Using drones in agriculture provides many advantages in farm management. However, the use of drones in paddy fields in Iran is a new phenomenon facing numerous challenges. This study aims to explore the challenges for using drones in paddy fields and provide practical guidelines to solve the challenges facing the their application. This research was conducted with a qualitative... J. Aliloo, E. Abbasi, E. Karamidehkordi , E. Ghanbari parmehr, M. Canavari, G.-. Vitali |
55. Treetop Tech: Uplifting German Foresters' Drone Perspectives Through the Technology Acceptance ModelForests play a key role in nature as they purify water, stabilize soil, cycle nutrients, store carbon and also provide habitats for wildlife. Economically, forest product industries provide jobs and economic wealth. Sustainable forest management and planning requires foresters’ understanding of the forests dynamics for which the collection of field data is necessary, which can be time consuming and expensive. Unmanned aerial vehicles or drones can improve the efficiency of tradition acquisition... M. Michels, H. Wever, O. Mußhoff |
56. Farming for a Greener Future: the Behavioural Drive Behind German Farmers’ Alternative Fuel Machinery Purchase IntentionsClimate change due to greenhouse gas emissions, e.g. anthropogenic carbon dioxide (CO2), in the atmosphere will lead to damages caused by global warming, increases in heavy rainfall, flooding as well as permafrost melt. One of the main issues for reducing greenhouse gas emissions is the dependence on oil for fueling transportation and other sectors. Accordingly, policy makers aim to reduce dependency on fossil fuels with the accelerated roll-out of renewable energy. Among others, the... M. Michels, V. Bonke, H. Wever, O. Mußhoff |
57. AgDataBox-IA – Web Application with Artificial Intelligence for Agricultural Data Analysis in Precision AgricultureAgriculture has been continually evolving, incorporating hardware, software, sensors, aerial surveys, soil sampling for chemical, physical, and granulometric analysis (based on sample grids), and microclimatic data, leading to a substantial volume of data. This requires platforms to store, manage, and transform these data into actionable information for decision-making in the field. In this regard, Artificial Intelligence (AI) is the most widely used tool globally to mine and transform vast data... R. Sobjak, C.L. Bazzi, K. Schenatto, W.K. Oliveira, A.E. Menegasso |
58. X-ray Imaging in Breeding and Harvesting ProcessesThe application of X-ray technology has a long tradition in different medical and technical fields. Compared to other sensor systems, its advantages lie in the capability to reveal structures within objects non-destructively. The analysis of X-ray images with image processing methods is applied for quality control, the detection of foreign objects or damages and other anomalies (e.g. in organs or bones). Until recently, the application of X-ray was mainly constrained to stationary applications... M. Weule, E. Hufnagel, J. Claussen, A. Berghaus, S. Burkhart, P. Noack, S. Gerth |
59. Machine Learning Approach to Study the Effect of Weather and Proposed Climate Change Scenarios on Variability in the Ohio Corn and Soybean YieldClimate is one of the primary factors that affects agricultural production. Climate change and extreme weather events have raised concerns about its effect on crop yields. Climate change patterns affect the crop yield in many ways including the length of the growing season, planting and harvest time windows, precipitation amount and frequency, and the growing degree days. It is important to analyze the effect of climate change on yield variability for a better understanding of the effect... R. Dhillon, G. Takoo |
60. Remote and Proximal Sensing for Sustainable Water Use in Almond Orchards in Southeast Spain in a Digital Farming ContextThe increasing expansion of irrigated almond orchards in regions of southeast Spain, facing water scarcity, underscores the need for a more effective and precise monitoring of the crop water status to optimize irrigation scheduling and improve crop water use efficiency. Remote and proximal sensing, combining visible, multispectral and thermal capabilities at different scales allows to estimate water needs, detect and quantify crop water stress, or identify different productivity zones within an... |
61. OATSmobile: a Data Hub for Underground Sensor Communications and Rural IoTWireless Underground Sensor Networks (WUSNs) play a crucial role in precision agriculture by providing information about moisture levels, temperature, nutrient availability, and other relevant factors. However, the use of radio-frequency identification (RFID) devices for WUSNs has been relatively unexplored despite their benefits such as low power consumption. In this work, we develop a hardware platform, called OATSMobile, that enables radio-frequency identification (RFID) communications in WUSNs.... F.A. Castiblanco rubio, A. Arun, B. Lee, A. Balmos, S. Jha, J. Krogmeier, D.J. Love, D. Buckmaster |
62. Sensor Based Fertigation ManagementSensor-based fertigation management (SBFM) is a relatively new technology for directing nitrogen (N) decisions, specifically tailored for delivery of N via center pivot irrigation systems (fertigation). The development of SBFM began in 2018 at the University of Nebraska-Lincoln with the help of cooperating producers across the state. Over two dozen field sites provided testbeds for the development and evaluation of the technology. The key technique in this fertigation approach is the... J. Stansell, J.D. Luck, T. Cross, K.J. Bathke, T. Smith |
63. Design of an Autonomous Ag Platform Capable of Field Scale Data Collection in Support of Artificial IntelligenceThe Pivot+ Array is intended to serve as an innovative, multi-user research platform dedicated to the autonomous monitoring, analysis, and manipulation of crops and inputs at the plant scale, covering extensive areas. It will effectively address many constraints that have historically limited large-scale agricultural sensor and robotic research. This achievement will be made possible by augmenting the well-established center pivot technology, known for its autonomy, with robust power infrastructure,... S. Jha, J. Krogmeier, D. Buckmaster, D.J. Love, R.H. Grant, M. Crawford, C. Brinton, C. Wang, D. Cappelleri, A. Balmos |
64. Agrosense: AI-enabled Sensing for Precision Management of Tree CropsMonitoring the tree inventory and canopy density and height frequently is critical for researchers and farm managers. However, it is very expensive and challenging to manually complete these tasks weekly. Therefore, a low-cost and artificial intelligence (AI) enhanced sensing system, Agrosense, was developed for tree inventory, canopy height measurement, and tree canopy density classification in this study. The sensing system mainly consisted of four RGB-D cameras, two Jetson Xavier NX, and one... C. Zhou, Y. Ampatzidis, H. Guan, W. Liu, A. De oliveira costa neto, S. Kunwar, O. Batuman |
65. Precision Agriculture Economics, Profitability, Adoption, and Risk Community MeetingAgenda Update on Community Activities Update on membership Announcement and introduction of incoming Deputy Leader Discussion points GIATE Symposium session Other activities AOB ... K. Behrendt, M. Michels |