Proceedings
Authors
| Filter results22 paper(s) found. |
|---|
1. I-SALUS: New Web Based Spatial Systems for Simulating Crop Yield and Environmental ImpactSALUS (System Approach to Land Use Sustainability) model is designed to simulate the impact of agronomic management on yield and environmental impact. SALUS model has new approaches and algorithms for simulating soil carbon, nitrogen, phosphorous, tillage, soil water balance and yield components. In the past, the use of the crop model was not easy for general... T. Chou, M. Yeh, J. Chen, B. Basso |
2. Spatial and Temporal Variability of Corn Grain Yield as a Function of Soil Parameters, and Climate FactorsEffective site-specific management requires an understanding the influence of soil and weather on yield variability. Our objective was to examine the influence of soil, precipitation, and temperature on spatial and temporal corn grain yield variability. The study site (10 by 250 -m in size) was located in Jaboticabal, São Paulo State, on a Rhodic Hapludox. Corn yield (planted with 0.9-m spacing) was measured... T. Mueller, J. Corá, A. Castrignanò, M. Rodrigues, E. Rienzi |
3. Introducing Precision Agriculture To High School Students In AustraliaThere is a growing need for tertiary qualified graduates in the Australian agricultural industry with only 7% of those employed in the sector holding a tertiary qualification compared to over 25% for the national workforce. With the need to greatly increase food and fibre production to feed and clothe a growing global population, and the adoption of precision agriculture technologies playing a huge part in this task, it is worrying that the demand for tertiary courses in agriculture in Australia... M.G. Trotter, A.M. Cosby |
4. Using A Decision Tree To Predict The Population Density Of Redheaded Cockchafer (Adoryphorus Couloni) In Dairy FieldsA native soil dwelling insect pest, the redheaded cockchafer (Adoryphorus couloni) (Burmeister) (RHC) is an important pest in the higher rainfall regions of south-eastern Australia. Due to the majority of its lifecycle spent underground feeding on the roots and soil organic matter the redheaded cockchafer is difficult to detect and control. The ability to predict the level of infestation and location of redheaded cockchafers in a field may give producers the option to use an endophyte containing... A. Cosby, G. Falzon, M. Trotter, J. Stanley, K. Powell, D. Schneider, D. Lamb |
5. Site Specific Costs Concerning Machine Path OrientationComputer algorithms have been created to simulate in advance the orientation/pattern of a machine operation on a field. Undesired impacts were obtained and quantified for these simulations, like: maneuvering and overlap of inputs in headlands; servicing of secondary units; and soil loss by water erosion. While the efforts could minimize the overall costs, they disregard the fact that these costs aren’t uniformly distributed over irregular fields. The cost of a non-productive machine process... M. Spekken, J.P. Molin, T.L. Romanelli, M.N. Ferraz |
6. NIR Spectroscopy to Map Quality Parameters of SugarcanePrecision Agriculture aims to explore the potential of each crop considering the differences within the field. One information that is considered the most important is the yield or the obtained income in the field. However, in the case of sugarcane, quality will also directly influence farmer’s income. Several studies suggest harvester automation aiming to monitor yield, but few consider the quality analysis in the process. Among the existing methods for measuring sugar content the one that... M.N. Ferraz, J.P. Molin |
7. Analysis of High Yield Condition Using a Rice Yield Predictive ModelRice production in Japan is facing problems of yield and quality instability owing to recent climate changes and a decline in rice prices, and possible competition with foreign inexpensive rice. Thus, it is becoming more important to stably achieve high yield and quality, while reducing production costs. Various data, including crop growth, farmer’s management styles, yield and quality, has recently become accessible in actual fields using advanced information and communication technologies.... Y. Hirai, T. Yamakawa, E. Inoue, T. Okayasu, M. Mitsuoka |
8. SMARTfarm Learning Hub: Next Generation Precision Agriculture Technologies for Agricultural EducationThe industry demands on higher education agricultural students are rapidly changing. New precision agriculture technologies are revolutionizing the farming industry but the education sector is failing to keep pace. This paper reports on the development of a key resource, the SMARTfarm Learning Hub (www.smartfarmhub.com) that will increase the skill base of higher education students using a range of new agricultural technologies and innovations. The Hub is a world first; it links real industry... M. Trotter, S. Gregory, T. Trotter, T. Acuna, D. Swain, W. Fasso, J. Roberts, A. Zikan, A. Cosby |
9. Plant and N Impacts on Corn (Zea Mays) Growth: Whats Controlling Yield?Studies were conducted in South Dakota to assess mechanisms of intraspecific competition between corn (Zea mays) plants. Treatments were two plant populations (74,500 and 149,000 plants ha-1), three levels of shade (0, 40, and 60%) on the low plant population, two water treatments (natural precipitation and natural + irrigation), and two N rates (0 and 228 kg N ha-1). In-season leaf chlorophyll content was measured. At harvest, grain and stover yields were quantified with grain 13C-discrimination... D.E. Clay, S.A. Clay, G. Reicks, D. Horvath |
10. Remote Sensing-based Biomass Maps for an Efficient Use of FertilizersFor decades the main objective of farmers was to get the highest yields from their farmland. Nowadays, quality of agricultural products is becoming more and more important for the largest returns. In addition, the effects on our environment are also becoming important. These put increasing limitations on modern agriculture. So-called site-specific management can optimize the input of, for instance, nutrients and pesticides to the need of the plants. In this study, the objective was to study whether... J.G. P.w clevers, K.H. Wijnholds, J.N. Jukema |
11. Optimum Spatial Resolution for Precision Weed ManagementThe occurrence and number of herbicide-resistant weeds in the world has increased in recent years. Controlling these weeds becomes more difficult and raises production costs. Precision spraying technologies have been developed to overcome this challenge. However, these systems still have relatively high acquisition cost, requiring studies of the relation between the spatial distribution of weeds and the economically optimum spatial resolution of the control method. In this context, the objective... R.G. Trevisan, M.T. Eitelwein, M.N. Ferraz, T.R. Tavares, J.P. Molin, D.C. Neves |
12. Soybean Plant Phenotyping Using Low-Cost SensorsPlant phenotyping techniques are important to present the performance of a crop and it interaction with the environment. The phenotype information is important for plant breeders to analyze and understand the plant responses from the ambient conditions and the inputs offered for it. However, for conclusive analysis it is necessary a large number of individuals. Thus, phenotyping is the bottleneck of plant breeding, a consequence of the labor intensive and costly nature of the classical phenotyping.... M.N. Ferraz, R.G. Trevisan, M.T. Eitelwein, J. Molin, F.H. Karp |
13. Correlating Plant Nitrogen Status in Cotton with UAV Based Multispectral ImageryCotton is an indeterminate crop; therefore, fertility management has a major impact on the growth pattern and subsequent yield. Remote sensing has become a promising method of assessing in-season cotton N status in recent years with the adoption of reliable low-cost unmanned aerial vehicles (UAVs), high-resolution sensors and availability of advanced image processing software into the precision agriculture field. This study was conducted on a UGA Tifton campus farm located in Tifton, GA. The main... W. Porter, D. Daughtry, G. Harris, R. Noland, J. Snider, S. Virk |
14. OATSmobile: a Data Hub for Underground Sensor Communications and Rural IoTWireless Underground Sensor Networks (WUSNs) play a crucial role in precision agriculture by providing information about moisture levels, temperature, nutrient availability, and other relevant factors. However, the use of radio-frequency identification (RFID) devices for WUSNs has been relatively unexplored despite their benefits such as low power consumption. In this work, we develop a hardware platform, called OATSMobile, that enables radio-frequency identification (RFID) communications in WUSNs.... F.A. Castiblanco rubio, A. Arun, B. Lee, A. Balmos, S. Jha, J. Krogmeier, D.J. Love, D. Buckmaster |
15. Avena: an Event-driven Software Framework for Informed Decisions and Actions in Cropping SystemsInteroperability is one of the enabling factors of real-time communications and data exchange between asynchronous data actors. Interoperability can be attained by introducing events to systems that extract data from consumed ground-truth event streams that utilize application-specific structures. Events are specific occurrences happening at a particular time and place. Event-data are observations of phenomena, or actions, as seen by different systems in Internet of Things (IoT) deployments, independent... F.A. Castiblanco rubio, M. Basir, A. Balmos, J. Krogmeier, D. Buckmaster |
16. Enabling Field-level Connectivity in Rural Digital Agriculture with Cloud-based LoRaWANThe widespread adoption of next-generation digital agriculture technologies in rural areas faces a critical challenge in the form of inadequate field-level connectivity. Traditional approaches to connecting people fall short in providing cost-effective solutions for many remote agricultural locations, exacerbating the digital divide. Current cellular networks, including 5G with millimeter wave technology, are urban-centric and struggle to meet the evolving digital agricultural needs, presenting... Y. Zhang, J. Bailey, A. Balmos, F.A. Castiblanco rubio, J. Krogmeier, D. Buckmaster, D. Love, J. Zhang, M. Allen |
17. Potential of Plant Phenotyping for Data-driven Greenhouse HorticultureWe are trying to investigate the use of various features extracted from plant images for the purpose of environmental control in greenhouses according to the growth conditions of plants. A measurement robot was utilized in order to collect plant images. Plant growth features (apical buds, flowers, fruits, etc.) were extracted by using a deep learning-based detector. In addition, we also introduced a 3D reconstruction technology to obtain the plant shape features such as plant height, internode... T. Okayasu |
18. High-reliability Navigation for Multi-functional Robots Using Rfid Triggers and 3d Slam in a Protected HorticultureProtected horticulture in Japan is facing a serious labor shortage, yet existing robots have not achieved sufficient return on investment, and their adoption remains limited. To support the deployment of multi-functional robots, we developed a high-reliability autonomous navigation system that integrates RFID-based event-triggered state transitions with LiDAR-based simultaneous localization and mapping (SLAM).The developed mobile platform was built on an omnidirectional robot equipped with four... T. Okayasu |
19. Performance Evaluation of Agricultural Spray Nozzle Under Different Pressure Conditions by Image AnalysisSpray nozzles are critical components in agricultural equipment used for pest control, pollination, and so on. The liquid ejected from the nozzle is broken down into droplets due to friction with the air and pressure changes. Consequently, the nozzle performance is often defined by alternative parameters to estimate the actual operating conditions. This study aims to determine the operating parameters of spray injection by photographing the movement of droplets ejected from a nozzle under different... T. Okayasu |
20. Using Floral Bract Withering to Identify Green-ripe Pineapples with Deep LearningGreen-ripe pineapples are ideal for extended transportation and storage during summer but are challenging to identify during on-site harvesting. This study introduces a deep learning-based approach using the YOLO-NAS algorithm to detect green-ripe pineapples by analyzing the withering rate of floral bracts at the fruit's base. A high- mounted tracked vehicle, equipped with an Intel D405 depth camera, captures images at a distance of 300–400 mm as it navigates pineapple ridges. The system... S. Chen |
21. Design and Development of UECS-based Environmental Monitoring and Control Platform Without CodingData-driven agriculture has been increasingly adopted to achieve labor-saving, energy efficiency, and resource optimization in agricultural operations. Among small- and medium-scale horticul- tures, the Ubiquitous Environment Control System (UECS) proposed in 2004 is attracting again due to low cost of introduction. The UECS is an autonomous and distributed open-source en- vironmental monitoring and control platform for greenhouse horticulture. A computer called a node is used in each environmental... T. Okayasu |
22. Evaluation of High-throughput 3d Reconstruction Method for Plants and Its Application to Traits Feature Extraction2D images are widely utilized to monitor and evaluate plant growth, capturing the dynamic and multi-directional nature of plant canopies remains difficult, emphasizing the need for 3D monitoring integrated with plant phenotyping systems.This study aims to introduce a high-throughput plant phenotyping system using 3D plant shape model reconstructed from a dataset of 2D plant images from multiple camera poses. A robot autonomously gathered data by recording video footage of plants from various viewpoints,... T. Okayasu |