Proceedings
Authors
| Filter results16 paper(s) found. |
|---|
1. A Comprehensive Model for Farmland Quality Evaluation with Multi-source Spatial InformationFarmland quality represents various properties, including two parts of natural influencing factors and social influencing factors. The natural factors and social factors are interrelated and interaction, which determine the developing direction of farmland system. In order to overcome the limitation of subjective factors and fuzzy incompatible information, a more scientific evaluation method of farmland quality should be developed to reflect the essential characteristic of farmland.... Y. Dong, Y. Wang, X. Song, X. Gu |
2. Precision Nutrient Management System Based on Ion and Crop Growth SensingAutomated sensing and variable-rate supply of nutrients in hydroponic solutions according to the status of crop growth would allow more efficient nutrient management for crop growth in closed systems. The Structure from Motion (SfM) method has risen as a new image sensing method to obtain 3D images of plants that can be used to estimate their growth, such as leaf cover area (LCA), plant height, and fresh weight. In this sense, sensor fusion technology combining ion-selective electrodes (ISEs)... W. Cho, D. Kim, C. Kang, H. Kim, J. Son, S. Chung, J. Jiang, H. Yun |
3. Corn Nitrogen Fertilizer Recommendation Models Based on Soil Hydrologic Groups Aid in Predicting Economically Optimal Nitrogen RatesNitrogen (N) fertilizer recommendations that match corn (Zea mays L.) N needs maximize grower profits and minimize water quality consequences. However, spatial and temporal variability makes determining future N requirements difficult. Studies have shown no single soil or weather measurement is consistently increases accuracy, especially when applied over a regional scale, in predicting economically optimal N rate (EONR). Basing site N response on soil hydrological group could help account for... G.M. Bean, N.R. Kitchen, J.J. Camberato, R.B. Ferguson, F.G. Fernandez, D.W. Franzen, C.A. Laboski, E.D. Nafziger, J.E. Sawyer, P.C. Scharf |
4. Using Canopy Hyperspectral Measurements to Evaluate Nitrogen Status in Different Leaf Layers of Winter WheatNitrogen (N) is one of the most important nutrient matters for crop growth and has the marked influence on the ultimate formation of yield and quality in crop production. As the most mobile nutrient constituent, N always transfers from the bottom to top leaves under N stress condition. Vertical gradient changes of leaf N concentration are a general feature in canopies of crops. Hence, it is significant to effectively acquire vertical N information for optimizing N fertilization managements.... X. Xu, Z. Li, G. Yang, X. Gu, X. Song, X. Yang, H. Feng |
5. Mapping Leaf Area Index of Maize in Tasseling Stage Based on Beer-Lambert Law and Landsat-8 ImageLeaf area index (LAI) is one of the important structural parameters of crop population, which could be used to monitor the variety of crop canopy structure and analyze photosynthesis rate. Mapping leaf area index of maize in a large scale by using remote sensing technology is very important for management of fertilizer and water, monitoring growth change and predicting yield. The Beer-Lambert law has been preliminarily applied to develop inversion model of crop LAI, and has achieved good application... X. Gu, S. Wang, G. Yang, X. Xu |
6. Cotton Boll Detection and Yield Estimation Using UAS Lidar Data and RGB ImageCotton boll distribution is a critical phenotypic trait that represents the plant's response to its environment. Accurate quantification of boll distribution provides valuable information for breeding cultivars with high yield and fiber quality. Manual methods for boll mapping are time-consuming and labor-intensive. We evaluated the application of Lidar point cloud and RGB image data in boll detection and distribution and yield estimation. Lidar data was acquired at 15 m using a DJI Matrice... Z. Lin, W. Guo, N. Gill |
7. Integration of Unmanned Aerial Systems Images and Yield Monitor in Improving Cotton Yield EstimationThe yield monitor is one of the most adopted precision agriculture technologies because it generates dense yield data to quantify the spatial variability of crop yield as a basis for site-specific management. However, yield monitor data has various errors that prevent proper interpretation and precise field management. The objective of this study was to evaluate the application of unmanned aerial systems (UAS) images in improving cotton yield monitor data. The study was conducted in a dryland... H. Gu, W. Guo |
8. Evaluation of Unmanned Aerial Vehicle Images in Estimating Cotton Nitrogen ContentEstimating crop nitrogen content is a critical step for optimizing nitrogen fertilizer application. The objective of this study was to evaluate the application of UAV images in estimating cotton (Gossypium hirsutum L.) N content. This study was conducted in a dryland cotton field in Garza County, Texas, in 2020. The experiment was implemented as a randomized complete block design with three N rates of 0, 34, and 67 kg N ha-1. A RedEdge multispectral sensor was used to acquire... R. Karn, H. Gu, O. Adedeji, W. Guo |
9. Modeling Spatial and Temporal Variability of Cotton Yield Using DSSAT for Decision Support in Precision AgricultureThe quantification of spatial and temporal variability of cotton yield provides critical information for optimizing resources, especially water. The Southern High Plains (SHP) of Texas is a major cotton (Gossypium hirsutum L.) production region with diminishing water supply. The objective of this study was to predict cotton yield variability using soil properties and topographic attributes. The DSSAT CROPGRO-Cotton model was used to simulate cotton growth, development and yield using... B.P. Ghimire, O. Adedeji, Z. Lin, W. Guo |
10. Estimation of Cotton Biomass Using Unmanned Aerial Systems and Satellite-based Remote SensingSatellite and unmanned aerial system (UAS) images are effective in monitoring crop growth at various spatial, temporal, and spectral scales. The objective of the study was to estimate cotton biomass at different growth stages using vegetation indices (VIs) derived from UAS and satellite images. This research was conducted in a cotton field in Hale County, Texas, in 2021. Data collected include 54 plant samples at different locations for three dates of the growing season. Multispectral images from... O.I. Adedeji, B.P. Ghimire, H. Gu, R. Karn, Z. Lin, W. Guo |
11. Functional Soil Property Mapping with Electrical Conductivity, Spectral and Satellite Remote SensorsProximal electrical conductivity (EC) and spectral sensing has been widely used as a cost-effective tool for soil mapping at field scale. The traditional method of calibrating proximal sensors for functional soil property prediction (e.g., soil organic matter, sand, silt, and clay contents) requires the local soil sample data, which results in a field-specific calibration. In this large-scale study consisting of 126 fields, we found that the traditional local calibration method had suffered weak... X. Xiong, D. Myers, J. Debruin, B. Gunzenhauser, N. Sampath, D. Ye, H. Underwood, R. Hensley |
12. Within Field Cotton Yield Prediction Using Temporal Satellite Imagery Combined with Deep LearningCrop yield prediction at the field scale plays a pivotal role in enhancing agricultural management, a vital component in addressing global food security challenges. Regional or county-level data, while valuable for broader agricultural planning, often lacks the precision required by farmers for effective and timely field management. The primary obstacle in utilizing satellite imagery to forecast crop yields at the field level lies in its low temporal and spatial resolutions. This study aims to... R. Karn, O. Adedeji, B.P. Ghimire, A. Abdalla, V. Sheng, G. Ritchie, W. Guo |
13. Assessing Precision Water Management in Cotton Using Unmanned Aerial Systems and Satellite Remote SensingThe goal of this study was to improve agricultural sustainability and water use efficiency by allocating the right amount of water at the right place and time within the field. The objectives were to assess the effect of variable rate irrigation (VRI) on cotton growth and yield and evaluate the application of satellites and Unmanned aerial systems (UAS) in capturing the spatial and temporal patterns of cotton growth response to irrigation. Irrigation treatments with six replications of three different... O. Adedeji, W. Guo, H. Alwaseela, B. Ghimire, E. Wieber, R. Karn |
14. Simulating Climate Change Impacts on Cotton Yield in the Texas High PlainsCrop yield prediction enables stakeholders to plan farming practices and marketing. Crop models can predict crop yield based on cropping system and practices, soil, and other environmental factors. These models are being used for decision support in agriculture in a variety of ways. Cultivar selection, water and nutrient input optimization, planting date selection, climate change analysis and yield prediction are some of the promising area of applications of the models in field level farm management.... B. Ghimire, R. Karn, O. Adedeji, G. Ritchie, W. Guo |
15. Predicting Within-field Cotton Yield Variability Using DSSAT for Decision Support in Precision AgricultureThe quantification of spatial and temporal variability of cotton (Gossypium hirsutum L.) yield provides critical information for optimizing resources, especially water, in the Southern High Plains (SHP), Texas, with a diminishing water supply. The within-field yield variation is mostly influenced by the properties of soil and their interaction with water and nutrients. The objective of this study was to predict within-field cotton yield variability using a crop growth model... B. Ghimire, R. Karn, O. Adedeji, W. Guo |
16. Evaluating the Impact of Irrigation Rate, Timing, and Maturity-based Cotton Cultivars on Yield and Fiber Quality in West TexasIn West Texas, effective irrigation is crucial for sustainable cotton production given the water scarcity from the declining Ogallala aquifer and erratic rainfall patterns. A three-year study (2020-2022) investigated irrigation rate and timing effects on early to mid-season cotton maturity groups. Five treatments, including rainfed (W1 or LLL) and variations in irrigation rates at growth stages (P1 to P4), were applied. Evaluation involved six to seven cotton cultivars from four maturity groups,... O. Adedeji, R. Karn, B.P. Ghimire, W. Guo, E.N. Wieber |