Proceedings
Authors
| Filter results28 paper(s) found. |
|---|
1. Spectral Discrimination Of Early Dchinochloa Crasgalli And Echinochloa Crusgalli In Corn And Soybean By Using Support Vector MachinesThe key to realize precise chemical application is weed identification. This paper introduces a kind of multi-classification mode based on Support Vector Machines (SVM) and one-against-one-algorithm for weed seedlings (Dchinochloa crasgalli, and Echinochloa crusgalli) in corn and soybean fields. A handheld FieldSpec® 3 Spectroradiometer manufactured by ASD Inc., in USA was used to measure the spectroscopic data of the canopies of the seedlings of corn, soybean,... W. Deng, G. Wu |
2. Comparison and Evaluation of Spray Characteristics of Three Types of Variable-Rate SprayFor the present developing direction of "low-input sustainable agriculture", variable-rate technology is increasingly concerned in agricultural engineering field. The technology of variable-rate precision chemical application is the typical of variable-rate technology. In China, agro-chemical production technology has reached the international advanced level, but the chemical application... C. Zhao, J. Zhou, W. Deng |
3. Using Multiplex® to Manage Nitrogen Variability in Champagne Vineyard... L. Marine, M. Manon, G. Claire, P. Laurent, F. Mostafa, C. Zoran, B. Naima, D. Sébastien, G. Olivier |
4. Spatial Variability Index Based On Soil Properties for Notill and Pasture Site-Specific Management in Brazil.Quantitative characterization of soil properties spatial variation has first been applied... R.P. De oliveira, A.C. Bernardi, V.D. Benites, L.M. Rabello, R.Y. Inamassu |
5. Adoption and Tendencies of Precision Agriculture Technologies in the Tocantins State, BrazilAlthough precision agriculture is widely used throughout Brazilian crop production, it has not been used to increase the efficiency use of agricultural inputs. Besides, technologies available have not been... L. Bortolon, E. Borghi, A. Luchiari junior, E.S. Bortolon, A.A. Freitas, R.Y. Inamasu, J.C. Avanzi |
6. Adoption Level Of Precision Agriculture For Brazilian Farmers - 2011/12 Crop YearAlthough Precision Agriculture (PA) concepts and technologies are widespread in Brazil, its application still little used in some important crop production regions. The purpose of this study was to survey the current adoption level of PA by printed and online questionnaire. We started making a specific questionnaire to farmers and PA service companies using some technology related to PA. The questionnaires were developed based on the methodology of Whipker and Akridge (2009),... E. Borghi, A. Luchiari junior, L. Bortolon, E.S. Bortolon, R.Y. Inamasu, A.C. Bernardi, J.C. Avanzi |
7. Development Of An Enterprise Level Precision Agriculture SystemDevelopment of an Enterprise Level Precision Agriculture System James Ellingson, Chih Lai University of St. Thomas, School of Engineering 2115 Summit Ave, St. Paul, MN USA elli4729@stthomas.edu; Abstract – In this paper, a plan for the development of an Enterprise Level system for Precision Agriculture (PA) is described. The basic... J.L. Ellingson, B.K. Holub, S.E. Morgan, B.K. Werkmeister |
8. Weed Identification From Seedling Cabbages Using Visible And Near-Infrared Spectrum AnalysisTarget identification is one of the main research content and also a key point in precision crop protection. The main purpose of the study is to choose the characteristic wavelengths (CW for short) to classify the cabbages and the weeds at their seedling stage using different data analysis methods. Using a handheld full-spectrum FieldSpec-FR, the canopies of the seedling plants, cabbage ‘8398, cabbage ‘zhonggan’, Barnyard grass, green foxtail, goosegrass,... W. Deng, X. Wang, C. Zhao, Y. Huang |
9. Evaluating Decision Systems For Using Variable Rates In Planting SoybeanIncreased interest in managing seeding rates within soybean fields is being driven by the advances in technologies and the need to increase productivity and economic returns. A wealth of previous research was focused on studying how different seeding rates affect soybean yields at small-plot scales. However, little is known how different site-specific factors influence the responsiveness of soybean to higher or lower plant population densities at field levels, especially across geographic... P. Reeg, P.M. Kyveryga, T.A. Mueller |
10. Considering Farmers' Situated Expertise in AgriDSS Development to Fostering Sustainable Farming Practices in Precision AgricultureAgriculture is facing immense challenges and sustainable intensification has been presented as a way forward where precision agriculture (PA) plays an important role. More sustainable agriculture needs farmers who embrace situated expertise and can handle changing farming systems. Many agricultural decision support systems (AgriDSS) have been developed to support farm management, but the traditional approach to AgriDSS development is mostly based on knowledge transfer. This has resulted in technology... C. Lundström, J. Lindblom |
11. FOODIE Data Model for Precision AgricultureThe agriculture sector is a unique sector due to its strategic importance for both citizens (consumers) and economy (regional and global), which ideally should make the whole sector a network of interacting organizations. The FOODIE project aims at building an open and interoperable agricultural specialized platform hub on the cloud for the management of spatial and non-spatial data relevant for farming production. The FOODIE service platform deals with including their thematic, spatial, and temporal... K. Charvat, T. Reznik, K. Charvat jr., V. Lukas, S. Horakova, M. Kepka |
12. Quo Vadis Precision FarmingThe agriculture sector is a unique sector due to its strategic importance for both citizens and economy which, ideally, should make the whole sector a network of interacting organizations. There is an increasing tension, the like of which is not experienced in any other sector, between the requirements to assure full safety and keep costs under control, but also assure the long-term strategic interests of Europe and worldwide. In that sense, agricultural production influences, and is influenced... K. Charvat, T. Reznik, V. Lukas, K. Charvat jr., S. Horakova, M. Splichal, M. Kepka |
13. Knowledge, Skills and Abilities Needed in the Precision Ag Workforce: an Industry SurveyPrecision agriculture encompasses a set of related technologies aimed at better utilization of crop inputs, increasing yield and quality, reducing risks, and enabling information flow throughout the crop supply and end-use chains. The most widely adopted precision practices have been automated systems related to equipment steering and precise input application, such as autoguidance and section controllers. Once installed, these systems are relatively easy for farmers and their supporting... B. Erickson, D.E. Clay, S.A. Clay, S. Fausti |
14. Design of VAV System of Air Assisted Sprayer in Orchard and Experimental Study in ChinaOne type of new automatic target detecting based on size of canopy with variable chemical dosage and air-flow of fan orchard sprayer was designed and developed to meet the demand of chemical pest control in orchards. Canopy parameter data scanned by infrared sensors and LIDAR (Light Detection and Ranging) were used to detect the target and to design spraying algorithm and PWM (Pulse Width Modulation) control system. Four integrated five-finger atomizers were equipped on each side of sprayer, independent... H. Xiongkui, L. Longlong, S. Jianli, Z. Aijun, L. Yajia |
15. Economic and Environmental Impacts in Sugarcane Production to Meet the Brazilian Ethanol Demands by 2030: The Role of Precision AgricultureThe agreement signed at COP-21 reaffirms the vital compromise of Brazil with sugarcane and ethanol production. To meet the established targets, the ethanol production should be 54 billion liters in 2030. From the agronomic standpoint, two alternatives are possible; increase the planted area and/or agricultural yield. The present study aimed to evaluate the economic and environmental impacts in sugarcane production meeting the established targets in São Paulo state. In this context, were... G.M. Sanches, T.F. Cardoso, M.F. Chagas, A.C. Luciano, D.G. Duft, P.S. Magalhães, H.C. Franco, A. Bonomi |
16. Automated Segmentation and Classification of Land Use from Overhead ImageryReliable land cover or habitat maps are an important component of any long-term landscape planning initiatives relying on current and past land use. Particularly in regions where sustainable management of natural resources is a goal, high spatial resolution habitat maps over large areas will give guidance in land-use management. We propose a computational approach to identify habitats based on the automated analysis of overhead imagery. Ultimately, this approach could be used to assist experts,... C. Pradalier, A. Richard, V. Perez, R. Van couwenberghe, A. Benbihi, P. Durand |
17. Increasing Corn (Zea Mays L.) Profitability by Site-Specific Seed and Nutrient Management in Igmand-Kisber Basin, HungaryVariable Rate Technology (VRT) in seeding and nutrient management has been developed in order to apply crop inputs variably. Farm equipment is widely available to manage in-field variability in Hungary, however, defining management zones, seed rates and amounts of nutrients is still a challenge. An increasing number of growers in Hungary have started adopting precision agriculture technology; however, data on profitability concerning site-specific seeding and nitrogen management is not widely... G. Milics, S. Szabó, K. Bűdi, A. Takács, V. Láng, S. Zsebo |
18. Overview and Value of Digital Technologies for North American Soybean ProducersIn the current state of digital agriculture, many digital technologies and services are offered to assist North American soybean producers. Opportunities for capturing and analyzing information related to soybean production methods are made available through the adoption of these technologies. However, often it is difficult for producers to know which digital tools and services are available to them or understand the value they can provide. The objective of this... J. Lee, J. Fulton, K. Port, R. Colley iii |
19. Tracking Two Decades of Precision Agriculture Through the Croplife Purdue SurveyThe CropLife/Purdue University precision dealer survey is the longest-running continuous survey of precision farming adoption. The 2017 survey is the 18th, conducted every year from 1997 to 2009, and then every other year following. For individuals working in agriculture there is great value in knowing who is doing what and why, to get a better understanding of the utilities and applications, and to guide investments. A major revision in survey questions was made... B. Erickson, J. Lowenberg-deboer, J. Bradford |
20. Evaluation of Image Acquisition Parameters and Data Extraction Methods on Plant Height Estimation with UAS ImageryAerial imagery from unmanned aircraft systems (UASs) has been increasingly used for field phenotyping and precision agriculture. Plant height is one important crop growth parameter that has been estimated from 3D point clouds and digital surface models (DSMs) derived from UAS-based aerial imagery. However, many factors can affect the accuracy of aerial plant height estimation. This study examined the effects of image overlap, pixel resolution, and data extraction methods on estimation... C. Yang, C. Suh, W. Guo, H. Zhao, J. Zhang, R. Eyster |
21. Using On-the-Go Soil Sensors to Assess Spatial Variability within the KS Wheat Breeding ProgramIn plant breeding the impacts of genotype by environment interactions and the challenges to quantify these interactions has long been recognized. Both macro and microenvironment variations in precipitation, temperature and soil nutrient availability have been shown to impact breeder selections. Traditionally, breeders mitigate these interactions by evaluating genotype performance across varying environments over multiple years. However, limitations in labor, equipment and seed availably can limit... B. Evers, M. Rekhi, G. Hettiarachchi, S. Welch, A. Fritz, P.D. Alderman, J. Poland |
22. Portable Soil EC - Development of an Electronic Device for Determining Soil Electrical ConductivityDecision-making in agriculture demands continuous monitoring, a factor that propels the advancement of tools within Agriculture 4.0. In this context, understanding soil characteristics is essential. Electrical conductivity (EC) sensors play a pivotal role in this comprehension. Given this backdrop, the core motivation of this research was developing an accessible and effective electronic device to measure the apparent EC of the soil. It provides features like geolocation, recording of the date... C.L. Bazzi, L.A. Rauber, W.K. Oliveira, R. Sobjak, K. Schenatto, L. Gebler, L.M. Rabello |
23. Global Adoption of Precision Agriculture: an Update on Trends and Emerging TechnologiesThe adoption of precision agriculture (PA) has been mixed. Some technologies (e.g., Global Navigation Satellite System (GNSS) guidance) have been adopted rapidly worldwide wherever there is mechanized agriculture. Adoption of some of the original PA technologies introduced in the 1990s has been modest almost everywhere (e.g., variable rate fertilizer). New and more advanced technologies based on robotics, uncrewed aerial vehicles (UAVs), machine vision, co-robotic automation, and artificial intelligence... J. Mcfadden, B. Erickson, J. Lowenberg-deboer, G. Milics |
24. Determining Site-Specific Soybean Optimal Seeding Rate Using On-Farm Precision ExperimentationTen on-farm precision experiments were conducted in Nebraska during 2018 – 2022 to address the following: i) determine the Economic Optimal Seeding Rates (EOSR), ii) identify the most important site-specific variables influencing the optimal seeding rates for soybeans. Seeding rates ranged from 200,000 to 440,000 seeds ha-1, and treatments were randomized and replicated in blocks across the entire field. The study was implemented using a variable rate prescription. Yield... M.M. Dalla betta, L. Puntel, L. Thompson, T. Mieno, J.D. Luck, N. Cafaro la menza, P. Paccioretti |
25. Rapid Assessment of Yield Using Machine Learning Models and UAV Multispectral Imagery for Soybean Breeding PlotsAdvances in precision agriculture in data collection, crop monitoring, screening, and management over the 10-15 years are revolutionizing on-farm agricultural research trials. In crop breeding plots, this approach is called "High Throughput Phenotyping", which uses innovative technology to extract phenotypic data for large populations. Remote sensing has become one of the commonly used platforms for rapid acquisition of imagery data at spatial and temporal scale. Particularly, the unmanned... A. Dua, A. Sharda, W. Schapaugh, R. Hessel, S. Rai |
26. Enhancing Seeding Efficiency: Evaluating Row Cleaners with Computer Vision in Precision AgricultureIn precision agriculture, the effective sowing of seeds is crucial but often hindered by challenges like hair pinning, low soil temperatures, and heavy residue on the soil surface. To address these issues, row cleaners are employed to clear the path for seeder opener discs, ensuring a clean, uniform trench for seed placement. This study examines the performance of various row cleaner models and introduces a novel method for their automatic, quantitative evaluation using computer vision technology. We... F. Sidharth, A. Sharda, B.G. Berretta |
27. Cotton Yield Estimation Using High-resolution Satellite Imagery Obtained from Planet SkySatSatellite images have been used to monitor and estimate crop yield. Over the years, significant improvements on spatial resolution have been made where ortho images can be generated at 30-centimeter resolution. In this study, we wanted to explore the potential use of Planet SKYSAT satellite system for cotton yield predictions. This system provided imagery data at 50 centimeters resolution, and we collected data 14 times during the season. The data were collected from two different cotton... M. Bhandari |
28. Ground-based Imagery Data Collection of Cotton Using a Robotic PlatformIn modern agriculture, technological advancements are pivotal in optimizing crop production and resource management. Integrating robotics and image processing techniques allows the efficient collection, analysis, and storage of high-resolution images crucial for monitoring crop health, identifying pest infestations, assessing growth stages, making precise management decisions and predicting yield potential. The objective of this project is to utilize the Farm-NG Amiga robot to develop an image... O. Fernandez, M. Bhandari, J.L. Landivar-scoot, M. Eldefrawy, L. Zhao, J. Landivar |