Proceedings
Authors
| Filter results40 paper(s) found. |
|---|
1. Optical Based Sugarcane Yield MonitorsSeveral different optical sensors were investigated to detect sugarcane yield on a billet type sugarcane harvester. These sensors included an over-head optical sensor and a below-the-conveyor sensor. Both sensors indicated mass flow rate from a volume measurement of the cane on the conveyor slats. Both systems gave good results with linear line calibration equations and adjusted R-square values from 0.96 to 0.97. Weight wagon weights in the 0.6 to 1.6 metric ton range were estimated to 7.5% on... R. Price, R.M. Johnson, R.P. Viator |
2. A Comparison Of Conventional And Sensor-based Lime Requirement MapsSuccessful variable-rate applications of agricultural inputs, such as lime, rely on quality of input data. Systematic soil sampling is... A.K. Jonjak, V.I. Adamchuk, C.S. Wortmann, C.A. Shapiro, R.B. Fergugson |
3. On-the-go Condition Mapping For Harvesting MachineryIn recent years control systems have been used to alleviate the task of harvesting machinery operators. Automation allows the operator to spend more time on other tasks such as coordinating transport. Moreover, such control systems guarantee constant performance throughout the day whereas an operator gets tired. The perfect control system anticipates on the harvest condition, just like an experienced operator would. The operator makes a visual assessment of the condition in terms of... T. Coen, J. De baerdemaeker, W. Saeys |
4. Spatial-temporal Management Zones For Biomass MoistureBiomass handling operations (harvesting, raking, collection, and transportation) are critical operations within the agricultural production system since they constitute the first link in the biomass supply chain, a fact of substantial importance considering the increasingly involvement of biomass in bio-refinery and bio-energy procedures. Nevertheless, the inherent uncertainty, imposed by the interaction between environmental, biological, and machinery factors, makes the available scheduling... S. Fountas, D. Bochtis, C. Sorensen, O. Green, R. J, T. Bartzanas |
5. Pa Adoption By A Korean Rice Farming Group: Case Study Of Pyeongtaek CityResearch on precision agriculture (PA) has been conducted in Korea for about 10 years since 1999. Most of the research was focused on rice paddy fields that were flooded, flat, and small sized (e.g., 30 m x 100 m). Accomplishment during the period includes investigation on spatial variability in soil, crop growth, and yield properties, application of imported sensors and variable rate applicators, and development of Korean version of these sensors... S. Chung, H. Yoo, S. Hong |
6. Gps Tracking Of Sheep To Investigate Shelter And Shade Use In Relation To Climatic ConditionsIn Australia inclement weather contributes to losses of new-born lambs and recently-shorn sheep. Provision of forced shelter has been observed to reduce lamb losses by up to 10 percent and when given a choice, ewes preferentially seek shelter on offer for a period of approximately two weeks post shearing (Alexander et al. 1980). Given significant sheep losses can occur during adverse weather conditions a better understanding of sheep use of shelter and/or alternative ways of attracting sheep to... D. Taylor, , , , , , |
7. Attaching Multiple Conductivity Meters To An Atv To Speed Up Precision Agriculture Soil SurveysGround conductivity meters are used in a number of precision agriculture applications, including the estimation of water content, nutrient levels, salinity and depth of topsoil. Typically the Geonics EM38 conductivity meter, and to a lesser extent the EM31, are used for soil surveys. Most conductivity surveys involve towing a ground conductivity meter behind an all-terrain vehicle (ATV). In some situations, such as rutted or sloping fields, it is preferable to mount the conductivity meter directly... E. Morris, A. Clarke, S. Sunley, C. Hill, G. Cranfield |
8. Remote Control System for Greenhouse Environment Using Mobile DevicesProtected crop production facilities such as greenhouse and plant factory have drawn interest and the area is increasing in Korea as well as in other countries in the world. Remote... S. Chung, K. Kim, H. Kim, J. Choi, Y. Zhang, S. Kang, K. han, S. Hur |
9. Determination of Sensor Locations for Monitoring of Soil Water Content in GreenhouseMonitoring and control of environmental condition is highly important for optimum control of the conditions, especially in greenhouse and plant factor, and the condition... S. Chung, Y. Huh, J. Choi, D. Ryu, K. Kim, H. Kim, H. Kim |
10. Evaluation of Photovoltaic Modules at Different Installation Angles and Times of the DaySeveral electricity-consuming components for cooling and heating, illumination, ventilation, and irrigation are used to maintain proper environments of protected crop cultivation facilities. Photovoltaic system is considered as one of the most promising alternative power source for protected cultivation. Effects of environment,... S. Chung, J. Kong, Y. Huh, K. Bae, S. Hur, D. Lee, Y. Chae |
11. Determination of Sensor Locations for Monitoring of Greenhouse Ambient EnvironmentIn protected crop production facilities such as greenhouse and plant factory, f... S. Chung, K. Kim, Y. Huh, S. Hur, S. Ha, M. Ryu, H. kim, K. han |
12. Spatial Variability of Sugarcane Yields in Relation to Soil Salinity in LouisianaHigh soil salinity levels have been documented to negatively impact sugarcane yields. Tests were conducted in commercial sugarcane fields in South Louisiana in 2009-2010 to determine if elevated soil salinity levels... R.P. Viator, R.M. Johnson |
13. Variability in Soil Water Content and Sensor-Based Irrigation Scheduling for Protected Ginseng ProductionGinseng is one of important medicinal plants, especially in Asian countries including Korea. Korean ginseng is mostly grown in sun-block facility on ridges, and irrigation would be critical for better production. Conventionally no irrigation or timer-controlled irrigation based on experience was practiced, and variability of... J. Cho, B. Cho, S. Chung |
14. Performance Evaluation Of Single And Multi-GNSS Receivers In Agricultural Field ConditionsSelection of appropriate receivers and utilization methods of positioning systems are important for better positioning in different applications of precision agriculture. Objective of this research was to evaluate the performance of single and multi-GNSS receivers at stationary and moving conditions in typical Korean agricultural sites such as open field, orchard area, and mountainous area A single-GNSS receiver (Model: R100; Hemisphere GNSS, Scottsdale, AZ, USA) and a multi-GNSS... Y. Kim, M. Song, S. Chung , M.S. Kabir, Y. Huh |
15. Design And Construction Of An Ultrasonic Cutting Width Sensor For Full-Feed Type Mid-Sized Multi-Purpose CombinesPrecision agriculture analyzes the spatial variability according to the characteristics of an optimum setting of agricultural materials. To raise the profitability of agriculture and to reduce the environmental impact, technological research and development of precision agriculture has been conducted. In Asian countries such as Japan... Y. Huh, S. Chung, Y. Chae, J. Lee, S. Kim, M. Choi, K. Jung |
16. Basic Tests Of pH And EC Probes For Automatic Real Time Nutrient Control In Protected Crop ProductionResearch on greenhouse and plant factory has been actively conducting to provide a stable growth environment. In plant factory, EC concentration (EC) and acidity (pH) of nutrient have a significant impact on physiological and morphological of plant. Therefore, EC and pH are important element for automatic control of nutrient solution. In this study, performance pH and EC sensors was evaluated for the responsiveness, accuracy and displacement. This study includes development of environmental... Y. Choo, S. Chung, Y. Huh, Y. Kim, S. Jang, K. Jung |
17. Field Tests and Improvement of Sensor and Control Interface Modules with Improved Compatibility for GreenhousesNumber of greenhouses has been increased in many countries to control the cultivation conditions and improve crop yield and quality. Recently, various sensors and control devices, and also wireless communication tools have been adopted for efficient monitoring and control of the greenhouse environments. However, there have been farmers’ demands for improved compatibility among the sensors and control devices. In the study, sensor and control interface modules with improved compatibility... K. Han, S. Chung |
18. Measuring Height of Sugarcane Plants Through LiDAR TechnologySugarcane (Saccharum spp.) has an important economic role in Brazilian agriculture, especially in São Paulo State. Variation in the volume of plants can be an indicative of biomass which, for sugarcane, strongly relates to the yield. Laser sensors, like LiDAR (Light Detection and Ranging), has been employed to estimate yield for corn, wheat and monitoring forests. The main advantage of using this type of sensor is the capability of real-time data acquisition in a non-destructive way, previously... T.F. Canata, J.P. Molin, A.F. Colaço, R.G. Trevisan, P.R. Fiorio, M. Martello |
19. Spatial Variability of Canopy Volume in a Commercial Citrus GroveLiDAR (light detection and ranging) sensors have shown good potential to estimate canopy volume and guide variable rate applications in different fruit crops. Oranges are a major crop in Brazil; however the spatial variability of geometrical parameters remains still unknown in large commercial groves, as well as the potential benefit of sensor guided variable rate applications. Thus, the objective of this work was to characterize the spatial variability of the canopy volume in a commercial orange... A.F. Colaço, J.P. Molin, R.G. Trevisan, J.R. Rosell-polo, A. Escolà |
20. Post Processing Software for Grain Yield Monitoring System Suitable to Korean Full-feed CombinesPrecision agriculture (PA) has been adopted in many countries and crop and country specific technologies have been implemented for different crops and agricultural practices. Although PA technologies have been developed mainly in countries such as USA, Europe, Australia, where field sizes are large, need of PA technologies has been also drawn in countries such as Japan and Korea, where field sizes are relatively small (about 1 ha). Although principles are similar, design concept and practical... K. Lee, S. Chung, J. Lee, S. Kim, Y. Kim, M. Choi |
21. Precision Nutrient Management Through Drip Irrigation in Aerobic RiceA field experiment was conducted during kharif 2015 to asses the spatial variability and precision nutrient management through drip irrigation in aerobic rice at ZARS, GKVK, Bangalore. The experimental field has been delineated into 48 grids of 4.5 m x 4.5 m using geospatial technology. Soil samples from 0-15 cm depth were collected and analysed. There was spatial variability for available nitrogen (154 to 277 kg ha-1), phosphorous (45 to 152 kg ha-1) and potassium... N. Dr., S. T, M. Giriyappa, H. D.c, B. Patil, D. Prabhudeva, G. Kombali, S. Noorasma, M. Thimmegowda |
22. In Season Estimation of Barley Biomass with Plant Height Derived by Terrestrial Laser ScanningThe monitoring of plant development during the growing season is a fundamental base for site-specific crop management. In this regard, the amount of plant biomass at a specific phenological stage is an important parameter to evaluate the actual crop status. Since biomass is directly only determinable with destructive sampling, methods of recording other plant parameters, such as crop height or density, which are suitable for reliable estimations are increasingly researched. Over the past two decades... N. Tilly |
23. Sources of Information to Delineate Management Zones for CottonCotton in Brazil is an input-intensive crop. Due to its cultivation in large fields, the spatial variability takes an important role in the management actions. Yield maps are a prime information to guide site-specific practices including delineation of management zones (MZ), but its adoption still faces big challenges. Other information such as historical satellite imagery or soil electrical conductivity might help delineating MZ as well as predicting crop performance. The objective of this work... R.G. Trevisan, M.T. Eitelwein, A.F. Colaço, J.P. Molin |
24. Challenges and Successes when Generating In-season Multi-temporal Calibrated Aerial ImageryDigital aerial imagery (DAI) of the crop canopy collected by aircraft and unmanned aerial vehicles is the yardstick of precision agriculture. However, the quantitative use of this imagery is often limited by its variable characteristics, low quality, and lack of radiometric calibration. To increase the quality and utility of using DAI in crop management, it is important to evaluate and address these limitations of DAI. Even though there have been improvements in spatial resolution... P.M. Kyveryga, J. Pritsolas, J. Connor, R. Pearson |
25. Evaluation of a Sensor and Control Interface Module for Monitoring of Greenhouse EnvironmentProtected horticulture in greenhouses and plant factories has been increased in many countries due to the advantages of year-round production in controlled environment for improved productivity and quality. For protected horticulture, environmental conditions are monitored and controlled through wired and wireless devices. Various devices are used for monitoring and control of spatial and temporal variability in crop growth environmental conditions. Recently, various sensors and control devices,... N. Sung, S. Chung, Y. Kim, K. Han, J. Choi, J. Kim, Y. Cho, S. Jang |
26. On-the-go Measurements of pH in Tropical SoilThe objective of this study was to assess the performance of a mobile sensor platform with ion-selective antimony electrodes (ISE) to determine pH on-the-go in a Brazilian tropical soil. The field experiments were carried out in a Cambisol in Piracicaba-SP, Brazil. To create pH variability, increasing doses (0, 1, 3, 5, 7 and 9 Mg ha-1) of lime were added on the experimental plots (25 x 10 m) one year before the data acquisitions. To estimate soil pH levels we used a Mobile Sensor Platform... M.T. Eitelwein, R.G. Trevisan, A.F. Colaço, M.R. Vargas, J.P. Molin |
27. An Automatic Control Method Research for 9YG-1.2 Large Round BalerWhen manual or semi-automatic round baler working, the tractor driver have to frequently manual the machine according to the bale process at the same time of driving. The driver easily feel fatigue in this operating mode for a long time, so the consistency of the bale’s density can not be guaranteed. And there may be wrong operation. In this article, we use the model 9YG-1.2 large round baler as a research prototype. We study the information collection and processing of the baler’s... J. Dong, Z. Meng, Y. Cong, A. Zhang, W. Fu, R. Pan, Q. Yang, Y. Shang |
28. Optimum Spatial Resolution for Precision Weed ManagementThe occurrence and number of herbicide-resistant weeds in the world has increased in recent years. Controlling these weeds becomes more difficult and raises production costs. Precision spraying technologies have been developed to overcome this challenge. However, these systems still have relatively high acquisition cost, requiring studies of the relation between the spatial distribution of weeds and the economically optimum spatial resolution of the control method. In this context, the objective... R.G. Trevisan, M.T. Eitelwein, M.N. Ferraz, T.R. Tavares, J.P. Molin, D.C. Neves |
29. Sensor Comparison for Yield Monitoring Systems of Small-Sized Potato HarvestersYield monitoring of potato in real time during harvesting would be useful for farmers, providing instant yield and income information. In the study, potentials of candidate sensors were evaluated with different yield measurement techniques for yield monitoring system of small-sized potato harvesters. Mass-based (i.e., load cell) and volume-based (i.e., CCD camera) sensors were selected and tested under laboratory conditions. For mass-based sensing, an impact plate instrumented with load cells... K.M. Swe, Y. Kim, D. Jeong, S. Lee, S. Chung, M.S. Kabir |
30. Variability Analysis of Temperature and Humidity for Control Optimization of a Hybrid Dehumidifier with a Heating Module for GreenhousesProtected horticulture using greenhouses and also recently plant factories is becoming more popular, especially for high-value crops such as paprika, tomato, strawberry, due to year-round production of high yield and better quality crops under controlled environment. Temperature and humidity are most important ambient environmental factors for not only optimum crop growth but also disease control. This study was conducted to analyze vertical and spatial variability of temperature and humidity... Y. Seo, W. Lee, Y. Kim, S. Chung, S. Jang, I. Bae |
31. Soybean Plant Phenotyping Using Low-Cost SensorsPlant phenotyping techniques are important to present the performance of a crop and it interaction with the environment. The phenotype information is important for plant breeders to analyze and understand the plant responses from the ambient conditions and the inputs offered for it. However, for conclusive analysis it is necessary a large number of individuals. Thus, phenotyping is the bottleneck of plant breeding, a consequence of the labor intensive and costly nature of the classical phenotyping.... M.N. Ferraz, R.G. Trevisan, M.T. Eitelwein, J. Molin, F.H. Karp |
32. Effectiveness of UAV-Based Remote Sensing Techniques in Determining Lettuce Nitrogen and Water StressesThis paper presents the results of the investigation on the effectiveness of UAV-based remote sensing data in determining lettuce nitrogen and water stresses. Multispectral images of the experimental lettuce plot at Cal Poly Pomona’s Spadra farm were collected from a UAV. Different rows of the lettuce plot were subject to different level of water and nitrogen applications. The UAV data were used in the determination of various vegetation indices. Proximal sensors used for ground-truthing... S. Bhandari, A. Raheja, M.R. Chaichi, R.L. Green, D. Do, M. Ansari, J.G. Wolf, A. Espinas, F.H. Pham, T.M. Sherman |
33. On-the-go Gamma Spectrometry and Its Evaluation Via Support Vector Machines: Really a Valuable Tool for Site-independent Soil Texture Prediction?With progressive implementation of precision agriculture (PA) techniques in current agricultural/ viticultural practice, the need for high-resolution information on soil properties at low effort and cost is increasing. Moreover, climate change and extended drought periods do even increase this demand. Evaluating soil fertility and carbon storage potential of arable fields and vineyards, e.g. for future economic assessment of ecosystem services, requires spatially resolved soil data. Soil texture... S. PÄtzold, T.W. Heggemann, R. Wehrle |
34. The Effect of Slope Gradient on the Modelling of Soil Carbon Dioxide Emissions in Different Tillage Systems at a Farm Using Precision Tillage Technology in HungaryUnderstanding the role of natural drivers in greenhouse gas (GHG) emitted by agricultural soils is crucial because it contributes to selecting and adapting acceptable eco-friendly farming practices. Hence, Syngenta Ltd. collaborating with researchers, aimed to investigate the effect of two tillage treatments, conventional-tillage (CT) and minimum-tillage (MT) on soil carbon dioxide (CO2) emissions. The research field is in Hungary. Soil columns were derived from different tillage systems... I.M. Kulmany, S. Benke, L. Bede, R. Pecze, V. Vona |
35. Nitrogen Status Prediction on Pasture Fields Can Be Reached Using Visible Light UAV Data Combined with Sentinel-2 ImageryPasture fields under integrated crop-livestock system usually receive low or no nitrogen fertilization rates, since the expectation is that nitrogen demand will be provided by the soybean remaining straw cropped previously. However, keeping nitrogen at suitable levels in the entire field is the key to achieving sustainability in agricultural production systems. In this sense, remote sensing technologies play an essential role in nitrogen monitoring in pastures and crops. With the launch of the... F.R. Pereira, J.P. Lima, R.G. Freitas, A.A. Dos reis, L.R. Amaral, G.K. Figueiredo, R.A. Lamparelli, J.C. Pereira, P.S. Magalhães |
36. Improving Winter Wheat Nitrogen Status Monitoring Using Proximal Canopy Sensing and Agrometeorological Information with Machine LearningTimely and accurate diagnosis of winter wheat nitrogen (N) status plays an important role in guiding precision N management. This study aims to combine proximal canopy sensing and agrometeorological information to establish a reliable winter wheat plant N concentration (PNC) monitoring model with seven machine learning (ML) algorithms (Random Forest Regression (RFR), Support Vector Regression (SVR), K-Nearest Neighbors Regression (KNNR), Partial Least Squares Regression (PLSR), Gradient Boosting... X. Chen, Y. Miao, K. Yu, Q. Chang, F. Li |
37. Using Informative Bayesian Priors and On-farm Experimentation to Predict Optimal Site-specific Nitrogen RatesMost U.S. Corn Belt states now recommend the Maximum Return to Nitrogen (MRTN) method for determining optimal nitrogen rates, which is based on 15 years of on-farm yield response to nitrogen trials. The MRTN method recommends a uniform rate for a region of a state. This study combines Illinois MRTN data, Bayesian methods, and on-farm experimentation from the Data Intensive Farm Management (DIFM) project to provide site-specific nitrogen recommendations. On-farm trials are now being used to provide... W. Brorsen, D. Poursina, C. Patterson, T. Mieno, B. Edge, E.D. Nafziger |
38. Automatic Body Condition Score Classification System for Individual Beef Cattle Using Computer VisionBody condition scoring (BCS) is a widely used parameter for assessing the utilization of energy reserves in the fat and muscle of cattle. It fulfills the needs of animal welfare and precision livestock farming by enabling effective monitoring of individual animals. It serves as a crucial parameter for optimizing nutrition, reproductive performance, overall health, and economic outcomes in beef cattle. The precise and consistent assessment of BCS relies on personal experience using visuals that... M. Islam, J. Yoder, H. Gan |
39. Utilizing Hyperspectral Field Imagery for Accurate Southern Leaf Blight Severity Grading in CornCrop disease detection using traditional scouting and visual inspection approaches can be laborious and time-consuming. Timely detection of disease and its severity over large spatial regions is critical for minimizing significant yield losses. Hyperspectral imagery has been demonstrated as a useful tool for a broad assessment of crop health. The use of spectral bands from hyperspectral data to predict disease severity and progression has been shown to have the capability of enhancing early... G. Vincent, M. Kudenov, P. Balint-kurti, R. Dean, C.M. Williams |
40. Cotton Yield Estimation Using High-resolution Satellite Imagery Obtained from Planet SkySatSatellite images have been used to monitor and estimate crop yield. Over the years, significant improvements on spatial resolution have been made where ortho images can be generated at 30-centimeter resolution. In this study, we wanted to explore the potential use of Planet SKYSAT satellite system for cotton yield predictions. This system provided imagery data at 50 centimeters resolution, and we collected data 14 times during the season. The data were collected from two different cotton... M. Bhandari |