Proceedings
Authors
| Filter results17 paper(s) found. |
|---|
1. Spectral Angle Mapper (SAM) Based Citrus Greening Disease Detection Using Airborne Hyperspectral ImagingOver the past two decades, hyperspectral (HS) imaging has provided remarkable performance in ground objects classification and disease identification, due to its high spectral resolution. In this paper, a novel method named ‘extended spectral angle mapping (ESAM)’ is proposed to detect citrus greening disease (Huanglongbing or HLB), which is a destructive disease of citrus. Firstly, Savitzky-Golay smoothing filter was applied to the raw image to remove spectral noise within the data,... W. Lee, K. Wang, H. Li, R. Ehsani, C. Yang |
2. Evaluating Spectral Measures Derived From Airborne Multispectral Imagery for Detecting Cotton Root RotCotton root rot, caused by the soilborne fungus Phymatotrichopsis omnivore, is one of the most destructive plant diseases occurring... C. Yang, G.N. Odvody, C.J. Fernandez, J.A. Landivar, R.L. Nichols |
3. Use Of Spectral Distance, Spectral Angle, And Plant Abundance Derived From Hyperspectral Imagery To Characterize Crop Growth VariationVegetation indices (VIs) derived from remote sensing imagery are commonly used to quantify crop growth and yield variations. As hyperspectral imagery is becoming more available, the number of possible VIs that can be calculated is overwhelmingly large. The objectives of this study were to examine spectral distance, spectral angle and plant abundance derived from all the bands in hyperspectral imagery and compare them with eight widely used two-band or three-band VIs based on selected wavelengths... C. Yang |
4. Multisensor Data Fusion Of Remotely Sensed Imagery For Crop Field MappingA wide variety of remote sensing data from airborne hyperspectral and multispectral images is available for site-specific management in agricultural application and production. Aerial imaging system may offer less expensive and high spatial resolution imagery with Near Infra-Red, Red, Green and Blue spectral wavebands. Hyperspectral sensor provides hundreds of spectral bands. Multisensor data fusion provides an effective paradigm for remote sensing applications by synthesizing... Y. Lan, H. Zhang, C. Yang, D. Martin, R. Lacey, Y. Huang, W.C. Hoffmann, P. Moulton |
5. Citrus Greening Disease Detection Using Airborne Multispectral And Hyperspectral ImagingCitrus greening disease (Huanglongbing or HLB) has become a major catastrophic disease in Florida’s $9 billion citrus industry since 2005, and continued to be spread to other parts of the U.S. There is no known cure for this disease. As of October 2009, citrus trees in 2,702 different sections (square mile) in 34 counties were infected in Florida. A set of hyperspectral imageries were used to develop disease detection algorithms using image-derived spectral library, the mixture tuned... W. Lee, A. Kumar, R. Ehsani, C. Yang, L.G. Albrigo, |
6. Using Airborne Imagery To Monitor Cotton Root Rot Infection Before And After Fungicide TreatmentCotton root rot, caused by the soilborne fungus Phymatotrichopsis omnivore, is a severe soilborne disease that has affected cotton production for over a century. Recent research has shown that a commercial fungicide, flutriafol, has potential for the control of this disease. To effectively and economically control this disease, it is necessary to identify infected areas within the field so that variable rate technology can be used to apply fungicide only to the... C. Yang, G.N. Odvody, R.R. Minzenmayer, R.L. Nichols, T. Isakeit, A. Thomasson |
7. Spatial and Temporal Variation of Soil Nitrogen Within Winter Wheat Growth SeasonThis study aims to explore the spatial and temporal variation characteristics of soil ammonium nitrogen and nitrate nitrogen within winter wheat growth season. A nitrogen-rich strip fertilizer experiment with eight different treatments was conducted in 2014. Soil nitrogen samples of 20-30cm depth near wheat root were collected by in-situ Macro Rhizon soil solution collector then soil ammonium nitrogen and nitrate nitrogen content determined by SEAL AutoAnalyzer3 instrument. Classical statistics... X. Song, G. Yang, Y. Ma, R. Wang, C. Yang |
8. Field Evaluation of a Variable-rate Aerial Application SystemVariable rate aerial application systems are becoming more readily available; however, aerial applicators typically only use the systems for constant rate application of materials, allowing the systems to compensate for upwind and downwind ground speed variations. Much of the resistance to variable rate application system adoption pertains to applicator’s trust in the systems to turn on and off automatically as desired. If an application system operating in an automatic mode were... D.E. Martin, C. Yang |
9. Creating Prescription Maps from Historical Imagery for Site-specific Management of Cotton Root RotCotton root rot, caused by the soilborne fungus Phymatotrichopsis omnivore, is a severe plant disease that has affected cotton production for over a century. Recent research found that a commercial fungicide, Topguard (flutriafol), was able to control this disease. As a result, Topguard Terra Fungicide, a new and more concentrated formulation developed specifically for this market was registered in 2015, so cotton producers can use this product to control the disease. Cotton root rot only infects... C. Yang, G.N. Odvody, J.A. Thomasson, T. Isakeit, R.L. Nichols |
10. Claypan Depth Effect on Soil Phosphorus and Potassium DynamicsUnderstanding the effects of fertilizer addition and crop removal on long-term change in spatially-variable soil test P (STP) and soil test K (STK) is crucial for maximizing the use of grower inputs on claypan soils. Using apparent electrical conductivity (ECa) to estimate topsoil depth (or depth to claypan, DTC) within fields could help capture the variability and guide site-specific applications of P and K. The objective of this study was to determine if DTC derived from ECa... L. Conway, M. Yost, N. Kitchen, K. Sudduth, B. Myers |
11. Field Potential Soil Variability Index to Identify Precision Agriculture OpportunityPrecision agriculture (PA) technologies used for identifying and managing within-field variability are not widely used despite decades of advancement. Technological innovations in agronomic tools, such as canopy reflectance or electrical conductivity sensors, have created opportunities to achieve a greater understanding of within-field variability. However, many are hesitant to adopt PA because uncertainty exists about field-specific performance or the potential return on investment. These concerns... C.W. Bobryk, M. Yost, N. Kitchen |
12. A Content Review of Precision Agriculture Courses Across the USKnowledge of what precision agriculture (PA) content is currently taught across the United States will help build a better understanding for what PA instructors should incorporate into their classes in the future. The University of Missouri partnered with several universities throughout the nation on a USDA challenge grant. Precision Agriculture faculty from 24 colleges/universities from across the U.S. shared their PA content by sharing their syllabi from 43 different courses. The syllabi were... D. Skouby, L. Schumacher, M. Yost, N.R. Kitchen |
13. Mapping Cotton Plant Height Using Digital Surface Models Derived from Overlapped Airborne ImageryHigh resolution aerial images captured from unmanned aircraft systems (UASs) are recently being used to measure plant height over small test plots for phenotyping, but airborne images from manned aircraft have the potential for mapping plant height more practically over large fields. The objectives of this study were to evaluate the feasibility to measure cotton plant height from digital surface models (DSMs) derived from overlapped airborne imagery and compare the image-based estimates with the... C. Yang |
14. Optimizing Corn Seeding Depth by Soil Texture to Achieve Uniform StandCorn (Zea mays L.) yield potential can be affected by uneven emergence. Corn emergence is influenced by both management and environmental conditions. Varying planting depth and rate as determined by soil characteristics could help improve emergence uniformity and grain yield. This study was conducted to assess varying corn seeding depths on plant emergence uniformity and yield on fine- and coarse-textured soils. Research was conducted on alluvial soil adjacent to the Missouri river with contrasting... S. Stewart, N. Kitcken, M. Yost, L. Conway |
15. Evaluation of Image Acquisition Parameters and Data Extraction Methods on Plant Height Estimation with UAS ImageryAerial imagery from unmanned aircraft systems (UASs) has been increasingly used for field phenotyping and precision agriculture. Plant height is one important crop growth parameter that has been estimated from 3D point clouds and digital surface models (DSMs) derived from UAS-based aerial imagery. However, many factors can affect the accuracy of aerial plant height estimation. This study examined the effects of image overlap, pixel resolution, and data extraction methods on estimation... C. Yang, C. Suh, W. Guo, H. Zhao, J. Zhang, R. Eyster |
16. Variable Rate Nitrogen Approach in a Potato-wheat-wheat Cropping SystemNitrogen application in agriculture is a vital process for optimal plant growth and yield outcomes. Different factors such as topography, soil properties, historical yield, and crop stress affect nitrogen (N) needs within a field. Applying variable N within a field could improve precision agriculture. Optimal N management is a system that involves applying a conservative variable base rate at or shortly after planting followed by in-season assessment and, if needed, variable rate application—with... E.A. Flint, M. Yost, B.G. Hopkins |
17. Influence of Ground Control Points and Processing Parameters on UAS Image Mosaicking for Plant Height EstimationDigital surface models (DSMs) and 3D point clouds, generated using overlapping images from unmanned aircraft systems (UASs), are often used for plant height estimation in phenotyping and precision agriculture. This study examined the effects of the quantity and placement of ground control points (GCPs) and image processing parameters on the creation of DSMs and 3D point clouds for plant height estimation. A 2-ha field containing multiple experimental plots with four crops (corn, cotton, sorghum,... C. Yang, H. Zhao, W. Guo, J. Zhang, C. Suh, B.K. Fritz |